Festo Air Solenoid Valve - VUVG-B14-T32C-AZT-F-1R8L

The Festo VUVG-B14-T32C-AZT-F-1R8L has a standard nominal flow rate of 510-600 l/min and a maximum flow rate of 600 L/min.

Monostable means the valve has one stable position (normally closed in this case) and requires continuous electrical power to shift to and hold the other position. When power is removed, it automatically returns to its stable state.

Yes, the E-box connection technology allows this valve to be used effectively as part of a valve manifold system.

This model features a flange pneumatic working port.

The valve operates on 24V DC.

This is a normally closed (NC) valve, meaning it is shut when de-energized and opens when energized.

A 2x3/2 valve typically has two pressure inputs and three output ports. It's commonly used for controlling single-acting actuators or pilot-signaling other valves.

Check 24V DC power supply connection and voltage. Ensure the electrical signal is correctly applied to the coil. Verify the `control` signal is active.

Inspect pneumatic connections for tightness. Check seals and gaskets for damage and replace if necessary. Ensure proper mounting to the manifold or base.

Verify that the nominal flow rate of the valve (510-600 l/min) meets the requirements of the connected actuator. Check for any restrictions in the pneumatic lines. Ensure adequate air supply pressure.

Confirm that power has been removed from the coil. Ensure no back pressure is preventing the return stroke. Check for internal obstructions.