Best current price£192.04from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£192.04Visit shop Floplast Grey 110Mm Industrial/Xtraflo Downpipe Kit - Swan Neck W Access Pipe
Visit shop
B&Q£236.29Visit shop B&Q - 110mm Industrial Xtraflo Downpipe KitSwan Neck With Access PipeGrey
Visit shop2 offers from £192.04 - £236.29
View price history by clicking the chart icon.
The FloPlast 110mm Industrial Downpipe Kit is designed for contractors and property owners managing high-capacity rainwater drainage for commercial or large residential buildings. It offers a professional swan neck configuration for flush wall mounting and includes an integrated access pipe for effortless maintenance. While it provides a robust, watertight solution for the FloPlast XtraFlo system, it is strictly intended for 110mm industrial applications and requires basic plumbing assembly skills.
| Model Part Number | INDDKITSNAPG |
|---|---|
| Brand | FloPlast |
No, this kit is designed for 110mm industrial systems and will not provide a watertight seal on smaller residential pipes.
Yes, it is designed to be unscrewed by hand, though a pair of grips may be used if it has been tightened excessively.
You will need a hacksaw, a tape measure, a drill for the wall clips, and a lubricant for the push-fit joints.
The kit includes the pipe clips, but you will need to provide the appropriate screws and wall plugs for your specific wall substrate (brick, concrete, etc.).
The access pipe is the primary point for debris; if a blockage occurs higher up, you may need to disassemble the push-fit joint nearest to the obstruction.
Check that the rubber ring seal is correctly seated inside the coupling and that the pipe end is chamfered/smooth to avoid damaging the seal during insertion.
Ensure the pipe end is cut square and use a silicone lubricant on the seal to reduce friction.
Ensure all six provided pipe clips are evenly spaced and securely fastened to the masonry wall using appropriate wall plugs.
To set up this kit, ensure you have a hacksaw to trim the 3m pipes to your exact site height requirements. Apply a small amount of silicone lubricant to the ring seals to ensure the pipe slips into the push-fit couplings easily.
Compatibility: This kit is specifically manufactured for the FloPlast XtraFlo 170mm industrial gutter range. It is not guaranteed to be compatible with other manufacturer's gutter systems or non-standard pipe sizes.
Care: Inspect the access pipe once a year, preferably before the autumn season. Ensure all wall clips are firmly tightened to support the weight of the pipe, especially when full of water during peak rainfall.
