Nomad 2mm Van Sound Deadening Sheets - Self Adhesive Butyl Mat - 1.875 Sqm 20 Pack
Upgrade your van build with NOMAD sound deadening sheets, engineered to reduce rattles, road noise...Upgrade your van build with NOMAD sound deadening sheets, engineered to reduce rattles, road noise and panel vibration before your insulation and lining go in. At 2mm thick, NOMAD is 33% thicker than the leading alternative, helping absorb more unwanted noise for a quieter drive.Made with a premium butyl rubber core, NOMAD stays flexible year-round without cracking or producing unpleasant odours. Its high-strength adhesive bonds securely to bare metal and performs in temperatures from -10°C to 85°C, making it ideal for long-term vehicle conversions.Installation is quick and straightforward thanks to 20 pre-cut sheets sized for common van panels including doors, floors and wheel arches. Simply cut to fit, peel and stick with no heat required above 10°C.Manufactured to automotive industry standards by an IATF 16949:2016 certified supplier and tested to ISO 3795 for vehicle interior flammability, NOMAD is trusted for durable, professional-grade performance.
NOMAD2MM THICK - 33% THICKER THAN THE LEADING ALTERNATIVE: At 2mm, NOMAD is thicker than the leading alternative on the market. More mass means less noise. STOPS RATTLES, ROAD NOISE AND PANEL VIBRATION: This is the layer you apply once to bare metal before your build goes in - the one you never want to redo. NOMAD's extra strength adhesive bonds firmly to panels and stays put through the full temperature range, from −10°C to 85°C. NO SMELL, NO CRACKING, STAYS FLEXIBLE YEAR-ROUND: NOMAD's high grade butyl core uses a premium rubber compound that stays odourless and flexible in all conditions - the material professional van converters specify for a reason. EASY INSTALLATION, 20 PRE-CUT SHEETS - 1.875 SQ.M COVERAGE: Each 375x250mm sheet is sized for door inners, floor panels and wheel arches - cut with scissors, peel and stick without heat above 10°C. BUILT TO AUTOMOTIVE STANDARDS: Manufactured by an IATF 16949:2016 certified supplier - the same quality management standard required of Tier 1 suppliers to Ford, BMW and Toyota. Fire retardant and flammability tested for vehicle interiors to ISO 3795.
B&Q - 2mm Van Sound Deadening Black Roll Self Adhesive Butyl Mat 500mm X 5M 2.5Sqm Insulation Van ConversionFree delivery in 1–3 days£34.99Visit shop →
B&Q - 2mm Van Sound Deadening Sheets Self Adhesive Butyl Mat 3.75Sqm 40 Pack Insulation Van ConversionFree delivery in 1–3 days£52.99Visit shop →
Product Information
Full details
This guide is for van builders and automotive enthusiasts seeking to significantly reduce interior noise. The Nomad 2mm sound deadening sheets offer a substantial upgrade in noise reduction by effectively stopping rattles, road noise, and panel vibrations before insulation. A potential consideration is ensuring proper surface preparation for optimal adhesion.
All features
Model Part Number
VY139127
Brand
Nomad
Extended Product Information
FAQs
What is the primary purpose of Nomad sound deadening sheets?
Their primary purpose is to reduce noise and vibration in vehicles by dampening metal panels. This includes rattles, road noise, and engine sounds.
Are these sheets suitable for all types of vehicles?
While marketed for van builds, they are suitable for any vehicle where reducing interior noise and vibration is desired, provided they can be applied to bare metal surfaces.
How much area do these 20 sheets cover?
The 20 pre-cut sheets provide a total coverage of 1.875 square meters.
Do I need any special tools for installation?
No, typically only sharp scissors or a utility knife for cutting and your hands to press the sheets down are required. A roller can be helpful for ensuring maximum adhesion.
Can I install these sheets in cold weather?
Installation is recommended above 10°C. If necessary, gently warm the metal surface (not the sheet) to improve adhesion in colder conditions.
Will the material produce an odor?
No, the premium butyl rubber core is engineered to be odorless, even in varying temperatures.
Are these sheets flammable?
No, the material has been tested to ISO 3795 for vehicle interior flammability and is considered fire retardant for automotive use.
Troubleshooting
Sheet not adhering well
Ensure the metal surface is thoroughly cleaned and dried before application. Re-apply pressure to the sheet, ensuring all edges are firmly pressed down. Consider ambient temperature if below 10°C.
Difficulty cutting sheets
Use a sharp utility knife or heavy-duty scissors. For very thick cuts, multiple passes might be necessary.
Bubbles or wrinkles after application
Carefully peel back the affected section and re-apply, smoothing out the material as you go. If the adhesive has fully cured, small imperfections may be unavoidable but generally do not impact performance.
Pros and Cons
Pros
Significantly reduces rattles, road noise, and panel vibrations.
Thicker material provides enhanced sound dampening compared to standard options.
Flexible and odorless butyl rubber core performs well in various temperatures.
Easy to cut and apply with strong, reliable adhesive.
Meets strict automotive industry standards for quality and safety.
Cons
Requires bare metal surface preparation for optimal adhesion.
Installation temperature minimum of 10°C needs to be considered in colder climates.
Coverage is 1.875 sq.m, potentially requiring multiple packs for larger vehicles.
Setup, Compatibility & Care
Setup & Installation:
Surface Preparation: Ensure the metal surface is clean, dry, and free of grease, oil, and dirt. For best results, use an automotive degreaser.
Cutting: Use sharp scissors or a utility knife to cut the sheets to the desired size and shape.
Application: Peel off the protective backing and firmly press the adhesive side onto the prepared metal surface. Ensure good contact by rolling or pressing down firmly, especially around edges.
Temperature: Installation is recommended when ambient temperatures are above 10°C. If working in colder conditions, slightly warming the panel surface (e.g., with a heat gun on a low setting, *not* the sheet itself) can improve adhesion.
Compatibility:
Nomad sheets are designed for application on bare metal surfaces commonly found in van interiors, including steel and aluminum.
They are compatible with subsequent insulation and lining materials like foam, carpet, or wood panels.
Care:
Once installed, the sound deadening sheets require no ongoing maintenance.
Clean the vehicle interior as usual. Avoid harsh chemicals directly on the sheets, though they are designed to be durable.
eBay£24.95Visit shop 
B&Q£28.99Visit shop 
