Best current price£75.82from B&Q
Shopping.co.uk recommended and popular offers
B&Q£75.82Visit shop B&Q - 60 Seconds All Purpose Glue 20G (12 Pack)Fast-Setting Clear Multipurpose Adhesive For MetalWoodRubberPlastic
Visit shop3 offers from £75.82
View price history by clicking the chart icon.
This 12-pack of Loctite 60 Seconds All Purpose Glue is ideal for frequent DIYers and households needing quick, reliable repairs. Its key benefit is bonding various materials in just 60 seconds, though users should note its suitability primarily for non-structural, small-area bonding. This bulk pack provides excellent value and convenience, ensuring you have a fast-acting, clear-drying adhesive ready for numerous projects.
| Colour | White |
|---|---|
| Model Part Number | 60 Seconds |
| Brand | Loctite |
While the glue sets in 60 seconds, full curing (achieving maximum strength) typically takes 24 hours.
This specific formulation is not ideal for most fabrics. It's best suited for rigid materials like plastic, metal, and wood. For fabric repairs, a fabric-specific adhesive is recommended.
The adhesive offers some resistance to water once fully cured, but it is not designed for prolonged submersion or high-moisture environments.
When stored correctly in a cool, dry place with the cap tightly sealed, unopened tubes typically have a shelf life of 1-2 years. Opened tubes should be used within a few months.
It is generally not recommended for use directly on electronic components due to potential chemical reactions or residue that could damage sensitive parts. Always test on a non-critical area first if attempting such a repair.
Dried cyanoacrylate glue can be difficult to remove. Soaking in warm, soapy water may help soften it. For hard surfaces, acetone-based nail polish remover can sometimes dissolve it, but test in an inconspicuous area first as it can damage some finishes. Scraping carefully with a blade may also work on very hard surfaces.
The 'White' designation likely refers to the product's packaging or a general product line categorization by the brand, rather than the color of the adhesive itself, which is clear when dry.
Ensure the cap is removed correctly and the nozzle is clear. If blocked, carefully use a pin to clear the opening.
Surfaces may not have been properly cleaned or dried. Ensure both surfaces are free from dust, oil, and moisture. Reapply, ensuring adequate pressure during the initial setting phase.
Do not pull skin apart. Soak the bonded area in warm, soapy water. Gently peel or roll the skin apart using a blunt edge like a spoon. Acetone-based nail polish remover can help dissolve dried adhesive on skin, but use with caution and rinse thoroughly.
Store the tubes with caps tightly sealed in a cool, dry place. If a small amount dries at the tip, it might be possible to clear it for further use. Significant drying within the tube may render it unusable.
Setup: No complex setup is required. Ensure the application surfaces are clean, dry, and free from dust, oil, or grease for best results. For plastics, it's advisable to test on an inconspicuous area first.
Compatibility: This adhesive is suitable for bonding metal, wood, rubber, plastic, and general household materials. It is *not* recommended for use on polystyrene, polyethylene, PTFE, or silicone rubber. Avoid contact with skin and eyes.
Care: Store tubes in a cool, dry place away from direct sunlight. Ensure the cap is securely fastened after each use to prevent the adhesive from drying out. If the nozzle becomes blocked, carefully clear it with a pin or needle.
