Best current price£271.14from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£271.14Visit shop (9 Port) Water Underfloor Heating Kit 1 - 12 Ports With Pump And Blending Valve Set 5060706095927
Visit shop
B&Q£290.82Visit shop B&Q - System Underfloor Heating 9 Port Psw Manifold With Manual Pump And Blending Valve Set Psw Tradesuppliers Ltd
Visit shop3 offers from £271.14 - £290.82
View price history by clicking the chart icon.
This 9-port underfloor heating manifold from Wärmer System is designed for homeowners and installers looking to precisely control multiple heating zones simultaneously. Its key benefit is the ability to set different temperatures for each zone, offering customized comfort and efficiency. A potential caveat is that while pre-mounted, manual assembly and configuration are still required. The manifold allows for flexible installation, adapting to left or right-hand supply configurations.
| Model Part Number | 9 |
|---|---|
| Brand | Wärmer System |
A 9-port manifold allows you to control the temperature of up to nine separate heating zones independently within an underfloor heating system.
No, this manifold is specifically designed for water-based (hydronic) underfloor heating systems. It is not compatible with electric systems.
The choice depends on the location of your main water supply and return pipes relative to the manifold. Consult your installation plan or a heating professional to determine the correct configuration for your setup.
While the manifold is pre-mounted, professional installation is highly recommended to ensure correct plumbing connections, system balancing, and safe operation.
Minimal maintenance is needed. Periodically inspect connections for leaks and ensure system pressure is maintained. Clean the exterior with a soft, damp cloth.
Temperature control for each zone is typically managed by individual thermostats or thermostatic heads connected to the manifold's return lines. Adjusting these controls will alter the flow of hot water to each specific zone.
Please refer to the product documentation or the retailer's website for specific warranty information, as it can vary.
Check that each zone's balancing valve is correctly adjusted. Ensure there are no blockages in the pipes leading to the underperforming zone. Verify the overall system pressure is adequate.
Inspect all connection points, including pipe fittings and valve seals. Tighten any loose connections. If the leak persists, a faulty seal or component may require replacement. Consult the installation manual or a professional.
Ensure the corresponding valve on the manifold is fully functional and not seized. Check if the pipework for that zone is correctly connected and not kinked. For thermostatic heads, ensure they are correctly installed and operational.
Verify that the main water supply valves are fully open. Check for any obstructions in the system's intake or filters. Ensure the pump is operating correctly and providing sufficient pressure.
Setup: The manifold is pre-mounted but requires final assembly according to your system's layout. Ensure you determine whether a left or right-hand supply configuration is needed for your project before proceeding. Connect the manifold to your underfloor heating pipes and the main water supply and return lines. Follow the provided manual for detailed connection instructions.
Compatibility: This manifold is designed for water-based underfloor heating systems. Verify compatibility with your existing boiler, pumps, and zone thermostats. Professional installation is recommended to ensure proper integration and performance.
Care: Minimal care is required. Periodically check for leaks around connections. Ensure the system pressure is maintained as per the underfloor heating system's specifications. Cleaning can be done with a dry or slightly damp cloth; avoid abrasive cleaners.
