Shopping.co.uk

Tyre Valves - Snap-in Car/Van 11.3 x 49 mm - TR414 - Pack of 100

Tyre Valves - Snap-in Car/Van 11.3 x 49 mm - TR414 - Pack of 100

Pack Of 100 Tubeless Tyre Valves with Cap TR414. These snap-in valves are suitable for cars and va...

Best current price£6.44from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

5 offers from £6.44 - £32.42

View price history by clicking the chart icon.

eBay10 x TR414 Tyre Valves - Snap-in Car/Van 11.3 x 49 mm - TY126
Free delivery in 1–3 days
£6.44
Visit shop
B&QB&Q - Tubeless Valves With Cap Tr414 Pack Of 100
Free delivery in 1–3 days
£32.42
Visit shop

Product Information

Full details

This pack of 100 tubeless tyre valves (TR414) from Mehr is designed for car and van applications, offering a reliable and cost-effective solution for maintaining tire pressure. They are easy to install and suitable for regular use, though users should be aware of the maximum pressure limit of 4.5 bar. Key features include their snap-in design, durable construction, and inclusion of caps for protection.

All features

Model Part NumberTY126B
BrandMehr

Extended Product Information

FAQs

What type of valve is this?

This is a TR414 snap-in tubeless tyre valve, commonly used for cars and vans.

What is the maximum pressure these valves can handle?

These valves have a maximum pressure rating of 4.5 bar (approximately 65 PSI).

How do I install these valves?

They are snap-in valves. With the wheel off, push the valve stem through the rim hole from the outside and pull it through from the inside using a valve pulling tool until the base is flush with the rim.

Are these valves suitable for trucks?

These valves are primarily designed for cars and vans. For heavier trucks, different valve types with higher pressure ratings may be required.

Do these valves come with caps?

Yes, each valve in the pack includes a protective valve cap.

What are the dimensions of these valves?

The dimensions are 11.3 mm in diameter and 49 mm in length.

How many valves are in this pack?

This pack contains 100 tubeless tyre valves.

Troubleshooting

Valve leaks air after installation

Ensure the valve base is seated correctly and flush against the rim. Check for any damage to the valve stem. If the issue persists, replace the valve.

Difficulty installing the valve

Lubricate the valve stem slightly with water or a tire mounting lubricant. Use a proper valve pulling tool to avoid damaging the stem. Ensure the rim hole is clean.

Valve cap is missing

A replacement valve cap can be used. Purchase a standard valve cap designed for Schrader-type valves.

Pros and Cons

Pros

  • Cost-effective bulk packaging.
  • Easy snap-in installation process.
  • Suitable for a broad range of vehicles.
  • Includes protective valve caps.
  • Standardized TR414 type for wide compatibility.

Cons

  • Maximum pressure limit of 4.5 bar may not suit all heavy-duty applications.
  • Requires basic tools for removal/installation of wheels.
  • Consumer-grade product, not intended for extreme performance vehicles.
  • Caps can be lost if not secured properly.

Setup, Compatibility & Care

Setup:

  1. Ensure the wheel rim is clean and free of debris.
  2. If the wheel is off the vehicle, insert the valve stem through the rim hole from the outside.
  3. Pull the valve stem through from the inside of the rim using a valve pulling tool until the base of the valve sits flush against the rim.
  4. Ensure a proper seal is formed around the rim hole.

Compatibility:

  • These TR414 valves are designed for tubeless tires commonly found on cars and vans.
  • They fit standard wheel rim holes for this valve type (11.3 mm diameter).
  • Always confirm your vehicle's tire requirements.

Care:

  • Keep the valve caps screwed on when not actively inflating the tire to prevent dirt and moisture ingress.
  • Periodically check valves for any signs of cracking or damage, especially during tire changes.
  • Clean around the valve stem before inflating if it appears dirty.

Price History

DatePrice
Visit shop