Best current price£12.99from eBay
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop Tetrion Super Fix Super Glue Filler High Strength Fast Setting - 2 x 4ml
Visit shop
B&Q£39.99Visit shop B&Q - 6X Super Fix Filler High Strength Fast Setting2 X 4Ml
Visit shop10 offers from £12.99 - £157.99
View price history by clicking the chart icon.
The Tetrion Super Fix is designed for DIY enthusiasts and professionals needing a quick and strong repair solution for various materials. Its key benefit is its rapid setting time combined with high strength, allowing for efficient completion of repairs. A caveat to be aware of is its fast-acting nature, which requires prompt application and finishing.
| Model Part Number | TETTSX001 |
|---|---|
| Brand | Tetrion |
While it sets hard within 5-10 minutes, full strength for sanding or drilling is typically achieved shortly thereafter, but refer to product packaging for specific timings.
It is suitable for some rigid plastics. However, always test on a small, inconspicuous area first to ensure compatibility and avoid damaging the material.
Mix only as much as you can use within the working time (typically a few minutes). For small repairs, a pea-sized amount of each component is sufficient.
Yes, once the filler has fully cured, it can be sanded, drilled, and painted to match the surrounding material.
When stored correctly in sealed tubes in a cool, dry place, it typically has a long shelf life. Refer to the packaging for any specific expiry dates.
Yes, it offers high strength and is durable once cured, making it suitable for many outdoor repair applications, provided the surface is properly prepared and sealed after repair.
Ensure you have mixed equal parts of the filler and hardener. Check that the mixing was thorough and that the ambient temperature is not too low, as this can slow the curing process.
Prepare your surfaces and tools beforehand. Mix only a small amount of filler at a time, enough for immediate application. Work quickly and decisively.
The surface may not have been properly prepared. Ensure it is clean, dry, and free from dust, grease, or contaminants. Lightly sanding porous surfaces can improve grip.
This can occur with deep fills. For deeper repairs, it may be necessary to apply the filler in layers, allowing each layer to partially set before applying the next.
Preparation is key for optimal performance. Ensure the surfaces to be repaired are clean, dry, and free from dust, grease, or loose material. For porous surfaces like wood or brick, a light sanding can improve adhesion.
Mixing: Carefully dispense equal lengths of the filler and hardener from the two tubes onto a clean, disposable surface. Mix them thoroughly and quickly with a clean spatula or mixing stick until a uniform color is achieved. Work efficiently as the mixture begins to harden after a few minutes.
Application: Apply the mixed filler immediately to the damaged area using a spatula or putty knife. Press firmly to ensure good contact and fill the void completely. Smooth the surface as much as possible during application.
Curing: The filler will harden within approximately 5-10 minutes at room temperature. Full strength is typically achieved after a short period, allowing for subsequent work like sanding or painting.
Compatibility: Tetrion Super Fix is generally compatible with wood, metal, brick, concrete, stone, and some rigid plastics. Test on an inconspicuous area if unsure.
Care: Store unused tubes tightly sealed in a cool, dry place, away from direct sunlight and extreme temperatures. Clean tools and application surfaces immediately after use with water. Once cured, the filled area can be treated like the surrounding material.
