D-C-Fix Kitchen Worktop Wrap - Jura Pine

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£23.97from B&Q

One Offer

1 offer from £23.97

View price history by clicking the chart icon.

B&QB&Q - Jura Pine 90Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£23.97
Visit shop

Product Information

Full details

This D-C-Fix self-adhesive vinyl wrap in Jura Pine is designed for homeowners looking to refresh kitchen worktops and other furniture on a budget. Its key benefit is providing a realistic woodgrain effect without the cost and mess of replacement, making it ideal for renters. A key caveat is its heat resistance limit of 70°C, requiring the use of worktop savers for hot pans.

All features

Model Part Number200-5622-3
Brandd-c-fix

Extended Product Information

FAQs

Can I use this on a textured countertop?

This vinyl wrap is best suited for smooth, flat surfaces. Application on heavily textured surfaces may result in poor adhesion and an uneven finish.

How do I remove the vinyl wrap?

Gently heat the vinyl with a hairdryer on a low setting. This softens the adhesive, allowing you to carefully peel the film away from the surface.

Is this product safe for food preparation areas?

Yes, the material is phthalate-free. However, it is recommended to use cutting boards for food preparation to protect the surface from scratches and to avoid placing hot pans directly on it.

What is the warranty period for this product?

The product comes with a 1-year guarantee.

Can I overlap the edges if I need more than one piece?

It is best to apply the vinyl in continuous pieces where possible. If joining is necessary, ensure a very tight seam, but avoid significant overlap which can create an uneven surface and catch points for dirt.

How do I clean the Jura Pine wrap?

You can wipe the surface clean with a damp cloth and mild soap if necessary. Avoid abrasive cleaners, as they can damage the finish.

What tools do I need for application?

You will need a utility cutter for trimming, a felt edge smoother for air bubbles, and a hairdryer on a low setting can be helpful for curves and removal.

Can I apply this over existing damage on my worktop?

The vinyl can cover minor imperfections, but significant damage, deep scratches, or unevenness should be repaired first for optimal adhesion and a smooth finish.

Troubleshooting

Air bubbles or creases appear during application.

Gently lift the vinyl using the repositionable adhesive and reapply, using a felt edge smoother to push out air bubbles. A hairdryer on a low setting can help make the vinyl more pliable.

Vinyl is not sticking well at the edges.

Ensure the surface is clean and dry. Apply a silicone sealant around the edges, especially near sinks and hobs, to prevent water from lifting the vinyl.

Difficulty applying around curved edges.

Use a hairdryer on a low setting to gently warm the vinyl. This makes it more pliable and easier to stretch and mould around curves. Apply steady pressure with the smoother.

Surface feels slightly warm after placing a hot item.

Remove the hot item immediately. The material is heat resistant up to 70°C. Always use a worktop saver for hot pans to prevent damage.

Pros and Cons

Pros

  • Budget-friendly alternative to replacing surfaces.
  • Suitable for renters due to its removable nature.
  • Realistic aesthetic with various design options available.
  • Easy to apply and reposition during installation.
  • Durable and simple to clean.
  • Professional quality from a leading brand.

Cons

  • Limited heat resistance (70°C); hot pans require protection.
  • Requires careful sealing around sinks and hobs to prevent water ingress.
  • Potential for air bubbles or creases if not applied carefully.
  • Not suitable for heavily textured or uneven surfaces.
  • May require a hairdryer for easier application on curves and removal.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth.
  2. Measure and cut the vinyl using the grid on the reverse.
  3. Peel back a small section of the backing paper.
  4. Carefully align the vinyl and apply it to the surface, using a felt edge smoother to push out air bubbles.
  5. For curved edges, use a hairdryer on a low setting to gently warm and mould the film.
  6. Trim any excess with a utility cutter.
  7. Seal edges around sinks and hobs with a silicone sealant.

Compatibility:

  • Ideal for flat, smooth surfaces like countertops, tabletops, furniture, and cabinet doors.
  • Not recommended for heavily textured, uneven, or porous surfaces.

Care:

  • Wipe clean with a damp cloth.
  • Wipe up spills immediately to prevent staining.
  • Avoid abrasive cleaners.
  • Use worktop savers for hot pans (above 70°C) and cutting boards for food preparation.

Price History

DatePrice
Visit shop