Timco Jagged Plasterboard Nails - Silver - JPN40B

They are primarily used for fixing plasterboard sheets to timber or metal studding as a traditional alternative to drywall screws.

It means the galvanised finish provides protection against corrosion in environments that are occasionally damp or wet, such as rural or sheltered indoor areas (Service Class 2).

There are approximately 570 pieces per 1kg pack.

No, these nails are designed for interior use and have medium-duty rust protection suitable for Service Class 2 environments. They are not intended for exterior use where they would be exposed to weather.

These nails have a Fire Classification of A1, indicating they are non-combustible.

These are hammered fixings providing a mechanical hold, whereas drywall screws are rotated into the substrate, offering a more precise and often stronger hold, especially for larger boards.

A standard claw hammer or ball-peen hammer with a flat face is suitable. Ensure the weight of the hammer is comfortable for consistent use.

Ensure the hammer strikes are direct and firm. Check if the substrate is too hard; consider pre-drilling a pilot hole. Use a hammer with appropriate weight.

Reduce the force of hammer blows. Ensure the nail is driven straight. Consider using a nail setting tool for a cleaner finish. For very hard materials, pre-drilling is recommended.

Verify the nail is penetrating sufficiently into the stud. Check that the plasterboard is adequately supported by the stud. For heavier boards, consider alternative fixings like screws.