FastCap Blind Nails - 9+5mm - Pack of 100

A blind nail is a fastener designed to create a mechanical connection from a hidden side, leaving no visible fastener heads on the finished surface.

You will need a compatible blind nail tool designed to accept and drive these dual-head nails.

No, these nails require a specialized blind nail tool for proper insertion and to achieve a hidden connection.

Each nail has dual heads measuring 9mm and 5mm (approximately 3/8" and 3/16").

Each pack contains 100 FastCap Double-Ended Blind Nails.

While made of hardened steel, they are best suited for interior applications where extreme weather exposure is not a factor. For outdoor use, consider fasteners specifically rated for exterior conditions.

Since the nails are hidden, there is no surface to paint or stain. The surrounding material can be finished as usual.

Ensure the blind nail tool is properly loaded and activated. Check that the nail is correctly seated in the tool's mechanism and that there are no obstructions.

Verify that the nail is driven into solid material and not into a void. Ensure the correct nail size is being used for the material thickness and application.

Check the nail for any defects or bends before insertion. Clean the blind nail tool mechanism as per the tool's manual.

This indicates the nail was not fully driven or the blind nail tool was not used correctly. Practice positioning and activation of the tool to ensure a hidden finish.