Best current price£12.58from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£12.58Visit shop Freefoam Golden Oak Fascia Board Double End Corner - 600Mm X 45Mm
Visit shop2 offers from £12.58 - £13.84
View price history by clicking the chart icon.
The Freefoam Fascia Board Double End Corner is an essential finishing component for homeowners and contractors installing PVC fascia systems. It is designed to professionally conceal the 10mm expansion gap required at eaves corners, providing a clean, aesthetic finish while maintaining structural integrity. While it offers excellent durability and a seamless look in Golden Oak, users must be diligent about the specific application method—using both adhesive and silicone—to properly accommodate thermal expansion and contraction.
| Model Part Number | FWXXWGO |
|---|---|
| Brand | Freefoam |
While it is designed for the Freefoam system, it may be compatible with other 45mm deep fascia systems, provided the dimensions match.
No. One side must be fixed with adhesive, but the other side must be sealed with low modulus silicone to allow for thermal movement.
The gap is strictly necessary to allow PVC to expand and contract due to temperature changes without causing the system to warp or buckle.
It is not recommended, as the factory-applied Golden Oak finish is designed for long-term durability and color matching.
You will need a hacksaw or fine-toothed saw, a tape measure, a sealant gun, and appropriate PVC adhesive and low modulus silicone.
Ensure that the fixed side of the corner was properly glued using a PVC-compatible adhesive.
Check that the expansion gap was left at the required 10mm and ensure you are not using high-modulus silicone, which may be too rigid.
Use a fine-toothed saw or a hacksaw with a high-tpi (teeth per inch) blade to prevent chipping the laminate.
To install, measure your corner height and use a fine-toothed saw or hacksaw to cut the trim to length if needed. Ensure the 10mm gap between your fascia boards is clean of debris before fitting the corner. Always apply high-quality low modulus silicone on the side designated for movement. For cleaning, wipe down with a soft, damp cloth and a mild soap solution. Avoid using abrasive chemicals or solvents that could damage the Golden Oak laminate finish.
