Shopping.co.uk

Trend Two Flute Straight Router Bit - 10mm x 25mm - 1/4in Shank

Trend Two Flute Straight Router Bit - 10mm x 25mm - 1/4in Shank

The Trend Two Flute Straight Cutter is designed to produce a cleaner finish compared to single flu...

Best current price£34.00from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

12 offers from £34.00 - £46.85

View price history by clicking the chart icon.

eBayTrend Two flute cutter 10 mm diameter 3/61X1/4TC FREE FAST DELIVERY
Free delivery in 1–3 days
£34.00
Visit shop
OnBuy.comTrend 3/61 X 1/4 Tct Two Flute Cutter 10 X 25Mm 3/61X1/4Tc 5027654037393
Free delivery in 1–3 days
£35.71
Visit shop
Power Tools DirectTrend 3/61X1/4Tc 3/61 X 1/4 Tct Two Flute Cutter 10.0 X 25Mm
£5.95 delivery
£37.52
Visit shop
B&QB&Q - 3/61X1/4Tc 3/61 X 1/4 Tct Two Flute Cutter 10.0 X 25mm Tre36114Tc
Free delivery in 1–3 days
£39.44
Visit shop
Blueperry agriculture (UK)Trend 3/61 X 1/4 Tct Two Flute Cutter 10Mm 3/61X1/4Tc
Free delivery in 1–3 days
£41.28
Visit shop

Product Information

Full details

The Trend Two Flute Straight Router Bit (10mm x 25mm) is designed for woodworkers and DIY enthusiasts who require precise, clean finishes for grooving, rebating, and morticing applications. By utilizing two flutes instead of one, this bit ensures a smoother cut and more consistent material removal across various substrates like MDF, chipboard, and hardwoods. While it excels at high-quality routing, users should note that the geometry of the bit leaves rounded internal corners that may require manual finishing with a chisel for sharp, square edges.

All features

Model Part Number3/61X1/4TC
BrandTrend

Extended Product Information

FAQs

Can I use this bit on softwoods?

Yes, this bit is perfectly suited for softwoods, as well as hardwoods, MDF, and plywood.

What is the cutting length of this bit?

The cutting length is 25mm.

Is this bit compatible with my 1/2 inch collet router?

Only if you use a 1/2 inch to 1/4 inch collet reducer sleeve.

How do I square off internal corners?

Because the bit is circular, the corners of any pocket will be rounded. Use a hand chisel to square these out manually.

Should I use this for plunge cutting?

Yes, it is designed for morticing and drilling, which involves plunge cutting.

Troubleshooting

Bit vibrating or chattering during use

Ensure the shank is fully seated in the collet and that the collet nut is tightened securely. Check for debris in the router collet.

Burning marks on the workpiece

Reduce the depth of cut or increase the router feed rate. Ensure the bit is clean and not dull.

Pros and Cons

Pros

  • Superior finish quality due to the dual-flute configuration
  • Excellent longevity when working with abrasive sheet materials like MDF
  • Highly versatile for both edge routing and plunge cutting applications
  • Universal 1/4 inch shank fits most residential and professional routers

Cons

  • Internal corners require secondary finishing with a chisel
  • Not suitable for extremely deep mortices in a single pass
  • Requires careful speed management to avoid burning hardwood

Setup, Compatibility & Care

To ensure peak performance and safety, follow these guidelines:

  1. Installation: Always insert the 1/4 inch shank into the router collet until the stop, then pull it back approximately 2mm to avoid bottoming out, which can cause vibration.
  2. Compatibility: This bit is compatible with any router that accepts a 1/4 inch collet. It is suited for chipboard, MDF, plywood, hardwoods, and hard plastics.
  3. Maintenance: Regularly remove resin and dust buildup from the flutes using a dedicated resin remover. Ensure the bit is stored in a protective case to prevent edge damage.
  4. Speed Settings: Adjust your router speed according to the material density—lower speeds for dense hardwoods and higher speeds for plastics or softwoods.

Price History

DatePrice
Visit shop