Best current price£23.10from B&Q
Shopping.co.uk recommended and popular offers
B&Q£23.10Visit shop B&Q - Quad 2-Way Rocker Light SwitchScrewless Brushed Brass With Polished Brass RockersXdb9S
Visit shop5 offers from £23.10 - £27.53
View price history by clicking the chart icon.
The Varilight 4-Gang Rocker Light Switch in Bronze is designed for homeowners and interior designers seeking a minimalist, high-end aesthetic for their lighting controls. Its primary benefit is the screwless, low-profile clip-on design that provides a clean, seamless appearance on any wall surface, though it does require a minimum 25mm deep wall box for proper installation, which may necessitate an upgrade in older properties.
| Colour | Bronze |
|---|---|
| Model Part Number | 1325124 |
| Brand | Varilight |
No, this product is designed to fit standard UK wall boxes already installed in your property.
Yes, this switch is rated at 10A and is suitable for both mains and low-voltage lighting circuits.
You must have at least a 25mm deep wall box for this switch to be installed safely.
This switch features a 1- or 2-way switching mechanism, allowing for versatile configuration.
Use a small, flat-head screwdriver to gently release the clips on the edge of the faceplate, being careful not to scratch the bronze finish.
This switch is not IP-rated for bathroom use; it should be installed in dry, internal rooms only.
Ensure the internal screws securing the base to the wall box are tightened sufficiently and the clip-on plate is fully snapped into its locking position.
Check that the wall box is deep enough (25mm minimum) and that no excess wiring is preventing the switch base from sitting flat against the wall surface.
Installation requires a standard UK wall box with a minimum depth of 25mm to accommodate the switch mechanism and internal wiring. Ensure all mains power is turned off at the consumer unit before beginning installation. The faceplate uses a clip-on mechanism; once the base is secured to the wall box, align the cover and press firmly until it snaps into place. To clean, use only a soft, dry cloth. Avoid abrasive cleaners, chemical solvents, or scouring pads, as these can damage the delicate bronze finish or leave scratches on the surface.
