TREK FX+ 7 Midstep 360Wh Electric Hybrid Bike - Lichen Green

The range can vary significantly based on factors like rider weight, terrain, assist level, and wind conditions. However, typical ranges for this battery size in urban environments can be between 30-60 miles (approx. 50-97 km).

Yes, the 360 Wh battery is designed to be easily removable for convenient charging indoors or at your workplace.

Please refer to the official TREK product specifications for the exact weight limit, as it is typically around 300 lbs (136 kg) for most Trek electric bikes.

The integrated front and rear lights are typically controlled via the bike's display unit or a button on the handlebar controls. Consult the user manual for specific instructions on your model.

The TREK FX+ 7 Midstep is primarily designed for urban commuting and paved surfaces. While it can handle light gravel paths, it is not intended for rugged off-road trails.

The TQ HPR50 motor is designed to be low-maintenance. Regular cleaning of the bike and ensuring the system is free from debris is usually sufficient. Avoid direct high-pressure washing on the motor unit.

Trek typically offers a limited lifetime warranty on frames and a limited warranty on components, including the electric system and battery. Specific warranty terms can be found on the official Trek website or in the product documentation.

Ensure the battery is fully charged and correctly inserted into its mount. Check that the power button has been pressed. If the issue persists, contact customer support.

Verify that the speed sensor is properly aligned and not obstructed. Check if the battery level is sufficient. Ensure you are pedaling, as most e-bike systems require initial pedal input to activate assist.

The battery may be nearing the end of its lifespan or has been stored improperly. Follow recommended charging and storage procedures. Contact support if the battery performance is significantly degraded.

Inspect brake pads for wear and clean rotors. For hydraulic brakes, ensure the system is not leaking and may require bleeding. Professional adjustment is recommended.

Check the derailleur hanger for bends. Ensure the gear cables are clean and properly tensioned. Lubricate the chain and cogs. A professional tune-up may be necessary.