Best current price£43.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£43.99Visit shop - 450mm Black Wall Bracket For Air Conditioners & Heat Pumps 150Kg Heavy-Duty
Visit shop1 offer from £43.99
View price history by clicking the chart icon.
The B&Q HL450 wall bracket is designed for HVAC installers and homeowners seeking a robust, reliable mounting solution for outdoor air conditioning condensers and air source heat pumps. This bracket offers the primary benefit of structural security and vibration reduction for units weighing up to 150kg, ensuring your hardware remains level and protected from ground-level debris. A key caveat to consider is that while the bracket is heavy-duty, the integrity of the installation depends entirely on the strength and composition of the wall it is mounted to, requiring careful assessment of the substrate before drilling.
| Model Part Number | HL450 |
|---|---|
| Brand | B&Q |
The bracket is rated to support equipment weighing up to 150kg.
No, you must provide appropriate wall anchors suitable for the specific type of wall material where the bracket will be mounted.
It is designed for masonry or concrete surfaces. If mounting to timber, you must ensure the structural wall studs can safely hold the load and use appropriate lag bolts.
The powder-coated finish is highly durable for outdoor use, but in extreme coastal environments, regular inspections are recommended to catch any early signs of corrosion.
The bracket provides a 450mm projection, which ensures optimal airflow for standard air conditioning and heat pump units.
Check if the wall anchors have loosened; ensure the anchors are rated for the weight of the unit and the specific wall substrate material.
Verify that rubber anti-vibration mounts were used between the unit and the bracket, and ensure all bolts connecting the unit to the bracket are fully tightened.
To install the HL450, verify that your wall material (brick, concrete, or structural block) is capable of supporting the combined weight of the bracket and the HVAC unit. Use appropriate heavy-duty masonry expansion bolts for the installation. Ensure the bracket is level both horizontally and vertically before tightening the fasteners. Compatibility is broad, covering standard wall-mounted split systems and heat pump condensers. For long-term care, inspect the powder coating annually for any scratches that may have occurred during maintenance; touch these up with an anti-corrosive paint to prevent oxidation. Keep the area behind the bracket free of debris and climbing plants to maintain optimal airflow.
