Welding Nozzle - 5mm Speed Tip
Best current price£14.11from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£14.11Visit shop Welding Nozzle 5Mm Speed Tip 5060970620467
Visit shopOnBuy.com£14.11Visit shop One Offer
1 offer from £14.11
View price history by clicking the chart icon.
Product Information
Full details
The CCA 5mm speed welding nozzle is designed for professional welders and dedicated DIY enthusiasts who prioritize precision and efficiency in their plastic welding projects. By utilizing a specialized speed slot design that fits over standard acorn nozzles, this tool enables the consistent, rapid application of 5mm weld rods for high-quality seams. While it provides excellent speed and control, users should note that it requires a standard acorn-style nozzle base to function, making it a specialized accessory rather than a standalone device.
All features
| Model Part Number | 2610 |
|---|---|
| Brand | CCA |
Extended Product Information
FAQs
Can I use this with a 3mm welding rod?
No, this nozzle is specifically engineered for 5mm weld rods; using a smaller rod will result in poor contact and weak welds.
Does this kit include the heat gun?
No, the CCA 5mm speed welding nozzle is an accessory and does not include the welding tool or the acorn nozzle base.
How do I clean plastic out of the speed slot?
Allow the nozzle to cool, then use a thin, stiff brush or a specialized nozzle cleaning needle to gently clear the obstruction.
What materials can I weld with this nozzle?
This nozzle is designed for use with thermoplastic welding rods compatible with standard plastic welding guns.
How heavy is the unit?
The nozzle is very lightweight, weighing approximately 40 grams.
Troubleshooting
Weld rod is sticking or not feeding smoothly
Ensure the guide slot is free of burnt plastic residue and that the welding rod is clean and free of debris.
Nozzle feels loose on the acorn base
Verify that your base nozzle is a standard acorn style and not damaged; replace the base nozzle if it has become worn or deformed.
Inconsistent weld quality
Adjust your travel speed to match the heat output of the gun and ensure the nozzle is held at a consistent angle relative to the material surface.
Pros and Cons
Pros
- Significantly increases welding speed compared to manual rod feed
- Lightweight design reduces operator hand fatigue
- High-durability construction for professional-grade longevity
- Compatible with most standard acorn welding nozzle bases
Cons
- Requires a separate acorn nozzle base for operation
- Limited to 5mm diameter welding rods only
- Not suitable for non-acorn style welding heating elements
Setup, Compatibility & Care
To set up the nozzle, ensure your hot air welding gun is equipped with a standard acorn nozzle base. Slide the 5mm speed tip firmly over the acorn tip until it sits securely; check for any wobble to ensure consistent heat transfer. Always perform a test run on scrap material to calibrate your movement speed relative to the heat gun output. To maintain the tool, allow the nozzle to cool completely after every use before removing it. Use a soft brass brush to remove any residual molten plastic from the guide slot immediately after cooling to prevent buildup that could clog the feed path.