Best current price£89.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£89.99Visit shop B&Q - Kb Panels 3D Wall PanelsBrick EffectLightweight EpsEasy InstallIndoor/outdoor5 Panels
Visit shop1 offer from £89.99
View price history by clicking the chart icon.
The K&B Panels 3D Brick Effect Wall Panels (TAS-712) are designed for homeowners and DIY enthusiasts seeking a high-impact aesthetic upgrade for their interiors without the expense or structural demands of masonry. Providing a realistic rustic brick texture through lightweight expanded polystyrene, these panels serve as an effective thermal and acoustic insulator; however, users should note they are made of foam, meaning they are susceptible to surface indentations if struck by hard objects.
| Model Part Number | KB-TAS-712-5 |
|---|---|
| Brand | K&B Panels |
It is strongly recommended to remove old wallpaper and ensure the substrate is clean, flat, and dry for the best adhesion.
These panels are made of expanded polystyrene. Always check local building codes regarding fire safety and do not install near open flames or high-heat sources.
No, a sharp utility knife for cutting, a tape measure, a spirit level for alignment, and a standard wall adhesive are all you need.
While the material is moisture-resistant, it is not waterproof. Avoid areas with direct water contact or extremely high humidity.
Measure the total square footage of your wall area and divide by the coverage provided by the 5 panels per pack, adding 10% for cutting waste.
No, the panels arrive in a neutral base color and are intended to be finished with standard emulsion paint by the user.
Use a lightweight filler to bridge the gap between panels and touch up with matching emulsion paint.
Re-apply a small amount of adhesive behind the lifting edge and hold firmly against the wall until set.
Fill the depression with a small amount of decorators caulk or polystyrene filler, sand lightly, and paint over the area.
Installation requires a clean, dry, and flat wall surface. Before application, ensure the wall is free of dust or debris. Use a recommended construction adhesive suitable for polystyrene, applying it to the back of the panel in dabs or lines as directed by the adhesive manufacturer. When planning your layout, start from a corner and work horizontally, pressing firmly until the adhesive sets. If you choose to paint the panels, use a brush or roller with standard water-based emulsion paint; avoid solvent-based paints, which may damage the polystyrene. To care for the finished wall, simply dust with a soft cloth or vacuum attachment periodically. To avoid surface damage, prevent direct physical impact from furniture or sharp objects.
