Philips Master LED T5 Tube 1500mm 36W 840 - White - D
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Philips Master LED T5 tube is designed for professionals seeking a direct mains voltage lighting solution for spaces requiring bright, neutral white illumination. Its key benefit is simplified installation without the need for a separate driver, leading to reduced maintenance and energy costs. A potential caveat is its IP20 rating, meaning it's suitable for dry, indoor environments only. This 1500mm tube provides 5600 lumens of 4000K light and offers a long lifespan, making it an efficient upgrade from traditional fluorescent tubes.
All features
| Colour | White |
|---|---|
| Energy Efficiency | D |
| Model Part Number | 929002474902 |
| Brand | Philips |
Extended Product Information
FAQs
Do I need a ballast or starter for this LED tube?
No, this Philips Master LED T5 tube is designed for direct mains voltage operation and does not require a ballast or starter. These components must be bypassed or removed from the fixture during installation.
Can I use this tube in my existing fluorescent T5 fixture?
Yes, but the fixture must be modified for direct mains voltage connection. The existing ballast and starter need to be removed and the wiring adjusted accordingly by a qualified electrician.
What is the color temperature of this light?
This tube has a color temperature of 4000K, which is considered neutral white light.
What is the lifespan of this LED tube?
The average nominal lifespan is 50,000 hours of operation.
Is this tube suitable for outdoor or damp locations?
No, this tube has an IP20 protection rating, meaning it is intended for use only in dry, indoor environments.
How does the energy consumption compare to a fluorescent tube?
This LED T5 tube offers significant energy savings compared to traditional fluorescent tubes of equivalent length and brightness, leading to lower electricity costs.
What is the lumen output of this tube?
This 1500mm tube provides a luminous flux of 5600 lumens.
Troubleshooting
Tube does not light up
Verify that power is supplied to the fixture. Ensure the tube is correctly seated in the G5 sockets. Confirm that the wiring is correct for direct mains voltage connection and that any old ballast/starter has been properly bypassed.
Flickering or intermittent light
Check all electrical connections for tightness. Ensure the mains voltage supply is stable. If the issue persists, the tube may be faulty or there might be an incompatibility with the fixture wiring.
Reduced light output
Ensure the tube is clean. Check for any voltage drop in the supply line. If the tube is old, it may be nearing the end of its lifespan, though this is rare with LEDs.
Pros and Cons
Pros
- Simplified installation due to direct mains voltage compatibility.
- Significant energy savings over traditional fluorescent lighting.
- Extended operational lifespan reduces replacement frequency and costs.
- High lumen output ensures bright and effective illumination.
- Neutral white light (4000K) is versatile for many professional environments.
- Reduced maintenance requirements contribute to lower operational overhead.
Cons
- IP20 rating restricts use to dry, indoor environments.
- Requires careful attention to wiring for direct mains connection.
- May not be compatible with older fixtures not designed for LED replacements.
- Initial replacement cost might be higher than a standard fluorescent tube.
Setup, Compatibility & Care
Setup:
This LED tube is designed for direct mains voltage connection (220-240V). Important: Installation requires qualified personnel familiar with mains wiring.
- Ensure the power is switched OFF at the mains.
- Remove the old fluorescent tube.
- If the existing fixture uses a starter, it must be removed. If the fixture has an electronic ballast, it may need to be bypassed or removed to allow direct connection to the mains voltage supply at the lamp holders.
- Install the LED T5 tube into the G5 sockets.
- Connect the mains voltage supply directly to the designated pins on the tube holders as per local electrical codes and fixture instructions.
- Restore power and test the light.
Compatibility:
- This tube is a T5 form factor with a G5 base.
- It is compatible with fixtures designed for T5 tubes, *provided* that the fixture is adapted for direct mains voltage connection (i.e., ballast and starter bypassed).
- Not compatible with fixtures that require specific electronic ballasts unless those ballasts are bypassed.
Care:
- Cleaning: Disconnect power before cleaning. Wipe the tube with a dry or slightly damp, soft cloth. Avoid abrasive cleaners or solvents, as they can damage the product.
- Ventilation: Ensure the fixture allows for adequate airflow around the tube, although LEDs generate less heat than fluorescents.
- Environment: Use only in dry, indoor environments due to the IP20 rating.