Hycote Aerosol Spray Paint - Satin Black - 400ml

This satin black aerosol spray paint is suitable for most metal, plastic, and ceramic surfaces. It can also be applied over existing acrylic and cellulose paint finishes.

While not strictly mandatory for all surfaces, using a Hycote primer is highly recommended for optimal adhesion, durability, and a professional finish, especially on metal and plastic.

The paint is fast-drying. Typically, it will be touch dry within 15-30 minutes, allowing for recoating within this timeframe. Full curing takes longer.

After you have finished spraying, turn the can upside down and spray for a few seconds until only clear propellant emerges. This prevents the nozzle from becoming blocked.

Hycote paints with Consol technology offer up to double the coverage of conventional spray paint cans, but actual coverage will vary depending on the surface and application thickness.

Yes, it can be used on automotive components like trim or bumpers. For full car bodywork, using automotive-specific primers, base coats, and lacquers is generally recommended for a professional finish.

Yes, the paint is formulated for extreme durability and is suitable for outdoor applications, provided the surface is properly prepared and primed.

Ensure the can is adequately shaken. If blockage persists, try clearing the nozzle by inverting and spraying. Check for temperature extremes; spray in recommended conditions.

The surface may not have been properly prepared. Ensure it is clean, dry, and ideally primed. Lightly sand glossy surfaces before application.

While Hycote offers high coverage, very porous surfaces or excessively thin coats may require more paint. Ensure application in recommended light coats and consider a second coat after the initial drying period.

This usually occurs from applying the paint too thickly or holding the can too close. Apply in light, even coats and maintain the recommended spraying distance. Allow adequate drying time between coats.