Makita Disc Cutter - DCE090ZX1 - 9""

Not Available Makita Disc Cutter - DCE090ZX1 - 9""

Brushless (BL) DC motor with high power to weight and size ratio generates less heat buildup and i...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

The Makita DCE090ZX1 is a powerful and versatile 9" disc cutter, ideal for professionals and serious DIYers working with concrete and other hard materials. Its brushless motor and advanced features provide efficient cutting and enhanced safety. Note that this is a bare unit, so you'll need to provide your own batteries and charger. It is designed for wet or dry cutting and is equipped with features like Active Feedback sensing Technology (AFT) for safety, an electric brake, and a soft start feature. This guide will help you understand and effectively use the DCE090ZX1 for optimal results.

All features

Model Part Number	Dce090Zx1
Brand	Makita

Extended Product Information

FAQs

What type of batteries does the DCE090ZX1 use?

The DCE090ZX1 uses two 18V LXT Li-Ion batteries in series. Batteries and charger are sold separately.

What is the blade size for the DCE090ZX1?

The DCE090ZX1 can accommodate a 230mm (9") blade. It comes with a D-41654 Diamond Segmented Cutting Wheel Saw Blade 230mm.

Is the DCE090ZX1 suitable for wet cutting?

Yes, the DCE090ZX1 is designed for wet cutting. It includes a water supply kit to minimize dust and a battery cover to protect the batteries.

What safety features does the DCE090ZX1 have?

The DCE090ZX1 has several safety features, including Active Feedback sensing Technology (AFT), an electric brake, and a lock-off button.

What materials can I cut with the DCE090ZX1?

The DCE090ZX1 is suitable for cutting concrete, tile, brick, and other masonry materials.

Where can I find replacement blades?

Replacement blades are widely available at home improvement stores and online retailers. Make sure to select blades compatible with a 9" disc cutter.

What is the purpose of the LED job light?

The LED job light illuminates the cutting area, providing better visibility in low-light conditions.

How do I clean the DCE090ZX1?

Wipe the tool with a damp cloth after each use. Avoid using solvents or abrasive cleaners. Blow out any debris from the motor vents.

Troubleshooting

The tool won't start.

Check the battery connection and ensure the batteries are charged. Verify the lock-off button is disengaged and the trigger is being fully depressed.

The blade is not cutting efficiently.

Check the blade for wear or damage. Ensure you are using the correct blade type for the material. Adjust the cutting technique and feed rate.

The tool stops suddenly during use.

The AFT system may have been triggered. Reduce pressure and check for any obstructions. Inspect the blade for binding.

Excessive dust during cutting.

If wet cutting is intended, ensure the water supply kit is properly connected and the water flow is adequate. Check the water supply.

Pros and Cons

Pros

Powerful Brushless Motor for efficient cutting.
Active Feedback sensing Technology (AFT) enhances user safety.
eXtreme Protection Technology (XPT) protects the tool from the elements.
Soft start feature for smoother operation.
LED job light provides better visibility.
Water supply kit enables wet cutting for dust control.

Cons

Bare tool only - requires batteries and charger (sold separately).
May require professional experience for complex cutting tasks.
Wet cutting requires water supply and creates a wet work environment.
Heavier than some smaller cutters.
Requires proper safety gear.

Setup, Compatibility & Care

Battery & Charger: The DCE090ZX1 is a bare unit. You need two 18V LXT batteries and a compatible charger (sold separately). Ensure the batteries are fully charged before use.
Blade Installation: Install the appropriate cutting wheel for your material. Ensure the blade is correctly aligned and secured. The DCE090ZX1 comes with a D-41654 Diamond Segmented Cutting Wheel Saw Blade 230mm for use on concrete.
Water Supply Kit: Attach the water supply kit if you plan to perform wet cutting. Connect the water hose and adjust the water flow to minimize dust without excessive water use.
Safety Check: Before each use, inspect the blade for damage, and check the functionality of the electric brake and AFT system.
Cleaning: After each use, clean the tool with a damp cloth. Avoid using solvents or abrasive cleaners. Blow out any debris from the motor vents.
Storage: Store the DCE090ZX1 in a clean, dry place, away from extreme temperatures and direct sunlight.
Compatibility: This tool is compatible with Makita 18V LXT batteries. Use only genuine Makita batteries and chargers for optimal performance and safety.