Shopping.co.uk

Agaflex 1 1/2 Inch Compression Joint Fittings - Male Thread

Agaflex 1 1/2 Inch Compression Joint Fittings - Male Thread

Universal fittings - compression joint for plain-ended pipe on one side, male thread on the other....

Best current price£46.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£46.99Visit shop

B&Q - 1 1/2 Inch X 50mm Pipe Compression Joint Fittings Male Thread Connector Union

Visit shop

One Offer

1 offer from £46.99

View price history by clicking the chart icon.

B&QB&Q - 1 1/2 Inch X 50mm Pipe Compression Joint Fittings Male Thread Connector Union
Free delivery in 1–3 days
£46.99
Visit shop

Product Information

Full details

This Agaflex compression joint fitting is designed for plumbing professionals and DIY enthusiasts needing a reliable connection between plain-ended pipes and male-threaded components. Its key benefit is offering a versatile, leak-free seal for various pipe types up to 16 bar pressure and 90°C temperature. A minor caveat is the need to ensure the pipe falls within the specified theoretical range for optimal performance.

All features

Model Part Number1
BrandAgaflex

Extended Product Information

FAQs

What types of pipes can be used with this fitting?

This fitting is designed for plain-ended pipes and can be clamped onto steel, PE, and other pipe materials that fall within the specified theoretical range for a 1 1/2 inch fitting.

What is the maximum pressure and temperature this fitting can handle?

The fitting has a maximum operating pressure of 16 bar and a maximum operating temperature of 90°C.

Do I need special tools to install this compression joint?

Typically, you will need two wrenches to tighten the compression nut. Ensure you have the correct size wrenches for a 1 1/2 inch fitting.

What does 'universal fittings' mean in this context?

It refers to the fitting's ability to connect to both plain-ended pipes and male-threaded components, making it versatile for various plumbing configurations.

Is this fitting suitable for gas lines?

No, this fitting is designed for water and is not suitable for gas lines. The NBR rubber seal may not be compatible with certain gases.

How do I ensure a leak-proof connection?

Ensure the pipe is correctly inserted, within the specified diameter range, and the compression nut is tightened sufficiently without overtightening. For threaded connections, use appropriate thread sealant.

What materials are the components made from?

The sleeve and nut are made of black malleable iron, the compression ring and washer are galvanized carbon steel, and the sealing ring is NBR rubber.

Troubleshooting

Leakage at the compression joint.

Ensure the pipe is fully inserted and centered. Check that the pipe diameter is within the specified range for the fitting. Tighten the compression nut further, but avoid over-tightening. Inspect the sleeve and pipe for damage.

Leakage at the male thread connection.

Verify the thread size is correct (1 1/2 inch male). Ensure threads on both components are clean. Apply appropriate thread sealant or PTFE tape to the male threads before assembly. Check the NBR sealing ring for damage or proper seating.

Difficulty tightening the compression nut.

Confirm the pipe is not deformed and is properly seated. Ensure there is no debris obstructing the threads. Lightly lubricate the threads with a compatible lubricant if necessary.

Fitting does not seal properly under pressure.

Confirm operating pressure does not exceed the 16 bar limit. Check the temperature is below 90°C. Ensure the correct pipe material and dimensions are used as per the manufacturer's application table.

Pros and Cons

Pros

  • Offers a universal connection solution for diverse pipe types.
  • Constructed with robust materials for durability and long service life.
  • Designed for high-pressure and high-temperature environments.
  • Easy to install using common clamping methods.
  • Provides a secure and reliable seal when pipe dimensions are within specification.

Cons

  • Requires careful selection based on pipe dimensions to ensure optimal performance.
  • NBR rubber seal may have limitations with certain aggressive chemicals.
  • Installation requires proper torque to avoid damaging the pipe or fitting.
  • Primarily designed for specific pipe types and sizes as per manufacturer charts.

Setup, Compatibility & Care

Setup:

  1. Ensure the plain end of the pipe is clean, free from burrs, and within the specified outer diameter for a 1 1/2 inch fitting.
  2. Slide the compression nut, followed by the sleeve, onto the plain end of the pipe.
  3. Insert the pipe fully into the fitting body until it seats against the internal stop.
  4. Slide the sleeve and nut forward to engage with the fitting body.
  5. Tighten the compression nut using appropriate wrenches until a secure seal is achieved. Avoid over-tightening.
  6. For the male thread connection, ensure threads are clean and apply appropriate thread sealant if necessary before screwing into the receiving component.

Compatibility:

  • Suitable for plain-ended pipes and 1 1/2 inch male threaded connections.
  • Compatible with steel, PE, and other pipe materials that fall within the specified theoretical range.
  • Not recommended for use with gases or aggressive chemicals that may degrade NBR rubber.

Care:

  • Regularly inspect the fitting for any signs of wear, corrosion, or leakage.
  • Keep the fitting area clean and free from debris.
  • For maintenance, disassembling and reassembling may be required, ensuring all components are correctly seated and seals are intact. Replacement seals (NBR rubber washer, sleeve, nut) may be necessary over time.

Price History

DatePrice
Visit shop