Best current price£56.23from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£56.23Visit shop 3X Creocote Creosote Substitute Dark Brown Timber Wood Fence Treatment 4Ltr 3117217224697
Visit shop1 offer from £56.23
View price history by clicking the chart icon.
This guide is for homeowners and DIY enthusiasts looking to protect and enhance exterior timber. The key benefit is deep protection against rot, decay, and weathering, resulting in long-lasting durability and an improved aesthetic. A potential caveat is its dark brown finish, which may not suit all desired looks. This high-performance wood preservative from Bartoline is designed for exterior joinery like doors, windows, and fences, offering a rich, dark brown hue.
| Colour | Brown |
|---|---|
| Model Part Number | Bartoline |
| Brand | Bartoline |
No, Creocote Timber Treatment is specifically designed for exterior use only and should not be used on interior wood surfaces.
The longevity of the protection depends on environmental exposure, but typically reapplications are recommended every 1-3 years to maintain optimal performance.
It is generally not recommended to paint or varnish over Creocote Timber Treatment once applied, as it is designed to be a final finish. However, compatibility with certain topcoats may exist; test in an inconspicuous area if necessary.
Drying times can vary based on temperature and humidity. It's advisable to allow at least 24 hours between coats, or until the surface is touch dry and fully absorbed.
While the product provides protection once dry, it's best to keep pets and children away from treated surfaces until they are fully dry and cured to avoid any contact.
Dispose of leftover product and empty containers according to local regulations for hazardous waste. Do not pour down drains or into the environment.
Ensure the wood surface was properly prepared and that the product was applied evenly. For subsequent coats, ensure consistent brush strokes or sprayer passes. Allow adequate drying time between coats.
Check that the wood surface is porous and dry. If the wood is very dense or has a non-porous finish, penetration may be limited. Apply additional coats if necessary, ensuring each coat is allowed to dry before the next.
This can indicate that the wood is already saturated or that the surface has a water-repellent finish. Ensure the wood is dry and clean. If the issue persists, the wood may require different treatment.
Ensure all areas were covered thoroughly with the recommended number of coats. Heavily degraded wood may require repair or replacement before treatment for optimal results.
Application: Ensure the timber surface is clean, dry, and free from dust, grease, or existing loose coatings. Apply evenly using a brush or sprayer. For best results, apply two or more coats, allowing sufficient drying time between each. Ensure good ventilation during application and drying.
Compatibility: This product is designed for use on bare or previously treated exterior wood. It is not recommended for use on wood that will be in direct contact with food or drinking water. Test on an inconspicuous area first if unsure about compatibility with existing finishes.
Care: Reapply as needed, typically every 1-3 years depending on exposure conditions, to maintain optimal protection and appearance. Clean application tools with water immediately after use. Store the product in a cool, dry place away from direct sunlight and frost.
