Best current price£156.22from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£156.22Visit shop Pressmaster 4300-4662 Proteus 10H Self Adjusting Crimp Tool Hex 0.14-10Mmâ² 7393785004527
Visit shop4 offers from £156.22 - £159.22
View price history by clicking the chart icon.
This Pressmaster Proteus 10H crimping tool is designed for electricians and technicians who need a reliable, efficient, and comfortable solution for crimping insulated and non-insulated ferrules/wire end sleeves. Its key benefit is the self-adjusting hexagonal crimp profile, ensuring precise and consistent results with minimal user effort, while a major caveat is its specific hexagonal crimp profile which may not be suitable for all ferrule types.
| Model Part Number | 4300-4662 |
|---|---|
| Brand | Pressmaster |
The Proteus 10H produces a hexagonal crimp profile.
The tool has a capacity of 0.14 to 10.0 mm² (AWG 26 to 8).
Yes, it is designed for crimping both insulated and non-insulated ferrules/wire end sleeves.
The ratchet ensures that the crimp cycle is completed fully according to specification. It prevents the tool from opening prematurely, guaranteeing a secure connection.
The tool automatically adjusts its internal mechanism to accommodate different ferrule sizes within its specified range, ensuring the correct pressure and crimp profile are applied without manual adjustment.
If the tool jams, first try using the emergency release lever. Clean any debris from the mechanism and ensure the correct size ferrule and wire are being used. If the problem persists, consult the troubleshooting section or contact support.
Yes, Pressmaster offers a similar model, the Proteus 10S, which provides a square crimp profile for different application needs.
Ensure the ferrule and wire are correctly inserted and seated within the crimping dies. Check that the wire gauge is within the tool's capacity (0.14-10.0 mm²). Verify the tool's ratchet is functioning correctly; if not, attempt the emergency release and re-engage.
Clean any debris from the moving parts and pivot points. Apply a small amount of light machine oil to the pivot mechanism. Ensure the ratchet is not jammed; use the emergency release if necessary.
Confirm that you are using ferrules designed for hexagonal crimping. Ensure the ferrule size and wire gauge are appropriate for the tool's capacity and settings.
Try engaging the emergency release lever. If the issue persists, inspect the ratchet mechanism for damage or obstruction. Contact customer support if the problem cannot be resolved.
Setup: The Pressmaster Proteus 10H is ready for use out of the box. Ensure the tool is clean and free from debris before its first use.
Compatibility: This tool is designed for crimping insulated and non-insulated ferrules/wire end sleeves using a hexagonal crimp profile. It is compatible with wire sizes ranging from 0.14 mm² to 10.0 mm² (AWG 26 to 8). Ensure the ferrules used are compatible with hexagonal crimping and fall within the specified wire gauge range.
Care:
