Best current price£5.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.99Visit shop Washing Machine Dishwasher Inlet Hose Connector 3/4" Threaded Bsp Joiner 5 Pack 5053197011279
Visit shop1 offer from £5.99
View price history by clicking the chart icon.
The Paxanpax universal inlet hose connector is an essential maintenance component for homeowners looking to extend or replace the water supply lines on their washing machines or dishwashers. Designed for those needing a secure, leak-proof connection, this 3/4-inch BSP threaded joiner provides a reliable alternative to original equipment, though users must ensure their existing hose threading matches the standard 3/4-inch specification before installation.
| Brand | Paxanpax |
|---|
Yes, as long as the machine uses a standard 3/4-inch BSP inlet hose connection.
While the threaded design is meant to seal against a rubber washer, you can use a small amount of PTFE (plumber's) tape if you experience persistent minor weeping.
These connectors are built to handle standard household water temperatures used in dishwashers and washing machines.
This pack contains 5 connectors; please ensure you retain and use the rubber washers from your existing hoses for the seal.
Tighten by hand until secure, then a further quarter-turn with pliers if necessary. Do not overtighten, as this can damage the plastic threads.
Ensure the rubber washer inside the hose is seated correctly and that the connector is tightened sufficiently.
Verify that your hose uses a standard 3/4-inch BSP thread and ensure the threads are free of mineral deposits or grit.
Check that the hose is not kinked behind the machine and that the connector is not overtightened, which can compress the internal washer and block the flow.
To install, ensure the water supply is turned off and the appliance is disconnected from the power source. Simply align the threaded ends of the hoses with the connector and rotate until tight. It is highly recommended to inspect the internal rubber washers within your existing hoses; if they are cracked or compressed, replace them alongside this connector to guarantee a water-tight seal. Periodically check the connection for moisture during the first few wash cycles after installation. Clean the threads of any debris before attaching to ensure a smooth, cross-thread-free connection.
