PRO Stealth Curved Team Saddle - Black - 142mm

Currently unavailable

Currently unavailable
The PRO Stealth Curved Team Saddle is designed for competitive road cyclists who prioritize an aerodynamic advantage and aggressive riding positions. It offers significant weight savings and pressure relief through its carbon-reinforced construction and anatomic recess, though its firm, performance-oriented padding may be too stiff for casual riders seeking a plush, endurance-focused experience.
| Colour | Black |
|---|---|
| Model Part Number | PRSSA0356 |
| Brand | PRO |
While primarily designed for road cycling, the carbon construction provides enough durability for gravel use, though it is tuned for performance rather than extreme vibration absorption.
The rails are standard 7x9mm oval size; ensure your seatpost clamp supports oval rails rather than just circular 7mm rails.
The PRO Stealth Curved Team features lightweight construction specifically designed to keep the overall bike weight low for competitive racing.
Yes, the anatomical design and width are engineered to provide support and comfort for both men and women cyclists.
Measure from the center of the bottom bracket to the top middle of the saddle, keeping in mind that the firm padding will have minimal sag compared to traditional saddles.
Verify that the seatpost clamp bolts are torqued to the correct specification and use a small amount of carbon assembly paste if slippage persists.
Clean the area where the rails meet the seatpost clamp, apply a thin layer of light grease to the bolt threads, and re-torque all fasteners.
Check your saddle angle; a slight nose-down adjustment is often preferred for aggressive positions to relieve front-end pressure.
When installing the PRO Stealth Curved Team Saddle, ensure your seatpost clamp is compatible with carbon rails; most modern alloy or carbon-specific clamps are suitable, provided they do not have sharp edges that could damage the rail structure. Always use a torque wrench to tighten the seatpost bolts to the manufacturer's recommended settings to prevent cracking the carbon rails. For care, clean the smooth PU cover with a soft cloth and mild soapy water after wet rides. Avoid using harsh chemical solvents or high-pressure sprayers, which can damage the synthetic cover or ingress into the padding interface.