SRAM Force1 Crankset - 175mm - 42T
Best current price£274.00from Leisure Lakes Bikes
Best offers
Shopping.co.uk recommended and popular offers
Leisure Lakes Bikes£274.00Visit shop Sram Force1 175mm Chainset 42T Black
Visit shopLeisure Lakes Bikes£274.00Visit shop All Offers
2 offers from £274.00
View price history by clicking the chart icon.
Leisure Lakes BikesSram Force1 175mm Chainset 42T Black
Free delivery in 1–3 days
£274.00
Visit shop
Sram Force1 175mm Chainset 42T BlackFree delivery in 1–3 days£274.00Visit shop →
Product Information
Full details
The SRAM Force1 175mm Crankset is designed for dedicated cyclists and gravel riders seeking reliable, high-performance drivetrain control in a 1x setup. Its standout benefit is the integration of the X-SYNC tooth profile, which ensures superior chain retention and performance even in challenging terrain; however, users should note that this crankset requires specific frame and bottom bracket compatibility to ensure a proper installation.
All features
| Model Part Number | CWR354002 |
|---|---|
| Brand | SRAM |
Extended Product Information
FAQs
Is this crankset compatible with 2x drivetrains?
No, the SRAM Force1 is specifically engineered for 1x drivetrain systems using the X-SYNC technology.
What is the primary benefit of the X-SYNC tooth profile?
The X-SYNC profile uses taller, square-toothed designs to engage the chain earlier and hold it more securely, preventing drops.
Does the 175mm length refer to the chainring or the crank arm?
The 175mm measurement refers to the length of the crank arms from the center of the bottom bracket spindle to the center of the pedal axle.
Can I replace the chainring on this crankset?
Yes, the detachable spider design allows for chainring replacement or serviceability.
What frames are compatible with this crankset?
This specific model is designed for use with frames featuring 130mm or 135mm rear spacing.
Troubleshooting
Chain dropping during high-speed descents
Check chainring for signs of excessive wear and verify the chain length is correct for a 1x setup.
Audible creaking under load
Remove the crank arms, clean the spindle and bottom bracket bearings, re-apply high-quality bicycle grease, and torque to manufacturer specs.
Pros and Cons
Pros
- Excellent chain retention via X-SYNC technology
- Durable forged aluminium construction
- Optimized for reliability in variable weather and terrain
- Easy-to-clean design with mud-clearing recesses
Cons
- Limited to 1x drivetrain configurations
- Requires specific bottom bracket compatibility
- Crank arm length may not suit all rider anthropometry
Setup, Compatibility & Care
To ensure proper function, the SRAM Force1 crankset must be paired with a compatible bottom bracket and frame. This model is engineered to work with frames featuring 130mm and 135mm rear spacing.
Installation Steps:
- Ensure the bottom bracket shell is clean and properly threaded or pressed according to frame specifications.
- Apply a light coat of grease to the spindle surfaces to prevent corrosion and creaking.
- Install the drive-side arm and spider assembly, ensuring the spindle is seated correctly.
- Tighten the non-drive side crank arm bolt to the torque specifications provided by the SRAM manual.
Care: Regularly check the chainring for wear. Wash the crankset with a mild degreaser and soft brush, paying extra attention to the mud-clearing recesses to maintain smooth drivetrain performance.