Best current price£42.46from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£42.46Visit shop Stanley Fatmax Bc2f Battery Charger And Maintainer: 2 Amp, Dual Voltage (6 And 12), Wet Gel Agm 814632015772
Visit shop2 offers from £42.46
View price history by clicking the chart icon.
The STANLEY FatMax BC2F is an ideal tool for automotive enthusiasts, seasonal vehicle owners, and those managing small engine power systems who need to keep lead-acid batteries at peak health during periods of inactivity. Its primary benefit is the ability to automatically maintain and charge 6-volt and 12-volt WET, GEL, and AGM batteries, effectively extending their lifespan. However, potential users should note that as a 2-amp charger, it is designed for maintenance and slow recovery rather than rapid engine starting or reviving deeply discharged, damaged batteries.
| Model Part Number | BC2F |
|---|---|
| Brand | Stanley |
Yes, the STANLEY BC2F is designed as a maintainer and is safe to leave connected to a healthy battery for long-term storage.
No, this model is specifically designed for lead-acid batteries (WET, GEL, and AGM) and should not be used with Lithium-ion packs.
The LED indicator on the unit will change status once the battery has reached its target capacity and has transitioned into maintenance mode.
Yes, it is perfectly safe to charge a battery while installed in the vehicle, provided you have clear access to the terminals.
No, this is a 2-amp trickle charger and maintainer. It does not provide the high amperage surge required to start an engine.
Check that both battery clips are firmly attached to clean terminals and the AC plug is securely seated in the wall outlet.
Check for a loose connection or a short circuit in the cables; if the sound persists after re-securing connections, stop use immediately.
If the charger completes the cycle but the battery dies quickly after removal, the battery itself may be at the end of its life and require professional testing.
To set up, first connect the desired output lead (clamps or ring terminals) to the unit's quick-connector. Attach the connectors to the corresponding battery terminals—Red to Positive (+), Black to Negative (-). Plug the charger into a standard AC outlet. If using an extension cord, ensure it is of appropriate gauge for the distance.
Regarding care, keep the unit clean and dry. Avoid leaving the cables in a position where they might be pinched by hoods or doors. Ensure the battery terminals are free of corrosion before connecting; cleaning them with a wire brush will significantly improve charging efficiency. When not in use, store the unit in a cool, dry place to protect internal electronics.
