Unifix Masonry Nail Pipe Clips - 22.0mm - Pack Of 100

These Unifix clips are designed for pipes with an external diameter of 22.0mm.

They are specifically designed for installation into solid masonry surfaces like brick, concrete, or plaster.

Position the pipe and clip against the masonry, then use a hammer to drive the integrated nail into the wall.

While durable, their suitability for outdoor use depends on environmental factors. The white finish may degrade over time with prolonged exposure to harsh weather. Ensure the masonry is also suitable for outdoor conditions.

These are designed for a permanent installation. While they can be removed, the nail may bend, and the clip may be damaged, making re-installation unreliable.

Each pack contains 100 Unifix White Masonry Nail Pipe Clips, each with a 22.0mm diameter.

These clips are designed for plumbing pipes. For electrical conduit, specific electrical conduit clips should be used to ensure safety and compliance.

Ensure the pipe diameter is exactly 22.0mm. Verify that the clip has been fully hammered into the masonry and is not loose.

The masonry may be too hard. Ensure you are using a suitable hammer and striking the nail head squarely. For extremely hard surfaces, a pilot hole might be considered, though this deviates from standard installation.

Ensure you are striking the nail head directly and not the plastic clip body. Use controlled hammer strikes. If the material feels brittle, check for defects in the clip.