Best current price£53.20from eBay
Shopping.co.uk recommended and popular offers
eBay£53.20Visit shop U-Pol S2080/5 2K Lacquer HS Super Crystal Clear Coat 2:1 5 Litre Can Upol
Visit shop2 offers from £53.20 - £103.50
View price history by clicking the chart icon.
The U-Pol System 20 HS Super Crystal Clear Coat 2:1 is designed for professional automotive refinishers and serious DIY enthusiasts who require a high-gloss, durable finish on vehicle paintwork. Its primary benefit is providing exceptional clarity and superior color matching, particularly for challenging tones like light silver metallics. A significant caveat is that this is a professional-grade chemical product, requiring proper respiratory protection, a well-ventilated spray booth or environment, and precise mixing to achieve the intended results.
| Model Part Number | S2080/5 |
|---|---|
| Brand | U-Pol |
| Container Volume | 7500ml |
Yes, it is compatible with most standard water-based automotive basecoat systems when properly prepared.
The pot life is typically around 1-2 hours at 20 degrees Celsius, though this varies based on temperature and hardener speed.
Generally, no. If you are within the recoat window, you can apply additional coats without sanding. If the window has passed, you must scuff the surface to ensure adhesion.
Yes, it contains high-quality UV absorbers designed to prevent yellowing and fading of the paintwork.
You must wear a supplied-air respirator, chemical-resistant gloves, and protective coveralls due to the isocyanates in the hardener.
Adjust the spray gun air pressure or reduce the paint viscosity slightly with a compatible thinner if allowed by technical data sheets.
Verify the 2:1 mixing ratio and ensure the hardener was not expired; check ambient temperature, as cold conditions drastically slow curing time.
Ensure there is no moisture in the air lines or spray environment; avoid spraying in high humidity.
To begin, ensure your surface is clean, dry, and free of wax or grease. Use a high-quality degreaser before application. The 2:1 mixing ratio must be strictly followed; use a calibrated mixing cup to ensure accuracy. If you are using an HVLP spray gun, set the air pressure according to the gun manufacturer's specifications for high-solids coatings to ensure proper atomization. Once the clear coat is applied, allow it to cure in a dust-free area. Avoid washing the vehicle with harsh chemicals for at least 48 to 72 hours post-application to allow for a full chemical cure. Always store the remaining hardener in a cool, dry place with the lid tightly sealed, as moisture exposure will cause the hardener to crystallize and become unusable.
