Best current price£19.33from eBay
Shopping.co.uk recommended and popular offers
eBay£19.33Visit shop Gewiss GW62482 Low Voltage Screw Wiring 90 Degree Angled Surface-Mounting Socket
Visit shop
The Range£19.73Visit shop Gewiss Low Voltage Screw Wiring 90 Degree Angled Surface-Mounting Socket-Outlet, Ip44, 3P+N+E Pole, - Grey
Visit shop4 offers from £19.33 - £38.18
View price history by clicking the chart icon.
The Gewiss 1317946 is a high-performance, surface-mounting industrial socket-outlet designed for electrical professionals and trade contractors who require reliable power distribution in demanding environments. Delivering robust connectivity through a 3P+N+T configuration at 400V, this unit ensures safety and long-term durability thanks to its IK08 impact rating and IP44 weather resistance. Please note that this unit requires professional electrical installation and is specifically designed for industrial 400V systems, making it unsuitable for standard domestic appliances.
| Model Part Number | 1317946 |
|---|---|
| Brand | Gewiss |
The Gewiss 1317946 is rated for 400 V.
The IP44 rating means it is protected against splashing water but is not waterproof; it should be installed in a sheltered location or protected from direct rainfall.
This refers to the electrical configuration: 3 phases, 1 neutral, and an earth (ground) connection.
No, this is an industrial socket (IEC 60309) designed specifically for industrial plugs and is not compatible with standard domestic electrical plugs.
The IK08 rating indicates that the enclosure provides protection against external mechanical impacts of up to 5 joules.
It is designed for operation at a frequency of 50 to 60 Hz.
Verify that the upstream circuit breaker is active and check that the industrial plug is fully seated into the 90-degree socket.
De-energize the unit, open the casing, and ensure all screw terminals are tight and that wires are not fraying.
Tighten the compression nut on the anti-abrasion cable gland until the cable is firmly gripped to maintain the IP44 seal.
Installation must be performed by a qualified professional to ensure compliance with local electrical regulations.
For care, periodically inspect the housing for cracks or signs of UV degradation if installed in semi-outdoor areas. Clean the exterior with a dry cloth; avoid aggressive chemicals that may compromise the integrity of the enclosure plastic.
