Phanteks Digital 3-Pin RGB LED Extension Y-Splitter Cable - PH-CB-DRGB3P
Best current price£8.29from PCHUB.UK
Best offers
Shopping.co.uk recommended and popular offers
PCHUB.UK£8.29Visit shop Phanteks Ph-Cb-Drgb3p Internal Power Cable
Visit shopPCHUB.UK£8.29Visit shop All Offers
2 offers from £8.29 - £9.95
View price history by clicking the chart icon.
Product Information
Full details
The Phanteks PH-CB-DRGB3P Y-splitter cable is designed for PC builders who need to expand their lighting control options when faced with a limited number of 5V 3-pin ARGB motherboard headers. This essential accessory allows you to synchronize two D-RGB fans or LED strips from a single output, providing a seamless lighting aesthetic; however, users should be cautious to verify that their total LED power draw does not exceed the amperage limit of the motherboard header.
All features
| Model Part Number | PH-CB-DRGB3P |
|---|---|
| Brand | Phanteks |
Extended Product Information
FAQs
Will this work with 12V 4-pin RGB fans?
No, this cable is specifically designed for 5V 3-pin Addressable RGB (ARGB) headers. Using it with 12V hardware will cause damage.
Can I use this to power the fan motors?
No, this splitter is designed exclusively for D-RGB lighting data and power; fan motor power must be connected to a separate fan header.
How many devices can I connect to one header using this?
This cable is designed to support two devices, but please check your motherboard manual to ensure the total power draw of those devices is within the header's limits.
Do I need specific software to use this?
No, this is a hardware-level splitter. It will work with whatever RGB control software your motherboard supports.
Are the connectors proprietary?
No, these use the industry-standard 3-pin ARGB connector format.
Troubleshooting
LEDs are not lighting up after connection
Verify that the connectors are fully seated and that the arrow on the 3-pin connector is aligned with the 5V pin on the motherboard.
Colors appear inconsistent between the two devices
Ensure both devices are true 5V 3-pin ARGB compatible devices; mixing different protocols or power requirements can cause synchronization errors.
Lighting flickers or turns off completely
Check if you have exceeded the amperage capacity of the motherboard header; disconnect one device to see if the flickering stops.
Pros and Cons
Pros
- Cost-effective solution for limited motherboard headers
- Easy plug-and-play installation
- Maintains synchronized lighting across multiple devices
- High-quality, reliable connections
Cons
- Requires careful monitoring of total power draw to avoid overloading the header
- Does not increase the data bandwidth for individual device control
- Short cable length may require additional extensions in larger cases
Setup, Compatibility & Care
To install, simply connect the single 3-pin end of the Y-splitter to your motherboard's 5V 3-pin ARGB header, then connect your two D-RGB devices to the two ends of the splitter. Always ensure the arrows on the connectors are aligned, as incorrect orientation can result in a failure to light or damage to the LEDs.
Compatibility is strictly limited to 5V 3-pin ARGB devices. Do not attempt to use this with 12V 4-pin RGB headers, as this will permanently damage your hardware. When managing multiple devices, avoid 'daisy-chaining' too many splitters, as excessive power draw can trip the motherboard's current protection or cause lighting flickering.