Best current price£49.99from Tooled Up
Shopping.co.uk recommended and popular offers
Tooled Up£49.99Visit shop Bosch Professional Bosch Pro 5 Piece 5X 4 Cutter Head 1.5X Life Sds Plus Masonry Drill Bit Set
Visit shop
B&Q£62.75Visit shop B&Q - Pro Hammer Drilling Electrician Kit (Version 1: Pro Short) 061599766W
Visit shop4 offers from £49.99 - £62.75
View price history by clicking the chart icon.
The Bosch PRO Hammer Drilling Electrician Kit is designed for professional electricians and contractors who frequently drill into reinforced concrete. Its primary benefit is the ability to navigate through hard rebar without the drill bit jamming, significantly increasing job site productivity and tool safety. A notable caveat is that while these bits excel in reinforced concrete, they are specifically optimized for this task and may be overkill for softer materials like brick or standard masonry.
| Model Part Number | 061599766W |
|---|---|
| Brand | Bosch |
No, these bits are specifically designed for SDS-plus chuck systems and will not fit standard 3-jaw drill chucks.
Yes, they will work on brick and stone, but they are specially optimized for reinforced concrete and rebar.
When the wear mark on the carbide head reaches the limit or if you notice a significant decrease in drilling speed.
Yes, they are designed for use with the high-impact force generated by professional rotary hammer drills.
Professional-grade carbide bits are difficult to sharpen correctly without specialized equipment; it is recommended to replace them to maintain performance.
Use a center punch to create a small dimple before starting the drill to guide the bit tip.
Ensure the bit is properly seated in the SDS-plus chuck and check that the hammer drill is set to the correct impact mode.
Retract the bit frequently while the drill is running to clear the flutes and eject debris from the hole.
These bits are compatible with all standard rotary hammer drills featuring an SDS-plus chuck system. To ensure maximum longevity: 1. Keep the drill bit cool by occasionally retracting it during deep holes to clear out dust. 2. Do not apply excessive side pressure, which can stress the carbide tip. 3. Clean the connection end of the bit periodically to remove debris. 4. Store in the provided case to prevent tip damage when not in use.
