Zoetis Cattle and Sheep BM Injector - 2ml

While it is calibrated for Spirovac, it can be used for other 2ml dose vaccines, provided they are compatible with the material construction of the injector.

The needle guard should be replaced when it becomes visibly soiled, the sponge loses its ability to hold cleaning fluid, or if the protective shroud shows signs of cracking.

Please refer to the specific manual provided with your unit; generally, internal seals and the Sterimatic housing are sensitive to high heat and should be cold-sterilized.

Disassemble the plunger assembly, clean it with warm soapy water, dry thoroughly, and apply a light coating of food-grade silicone lubricant.

The injector is typically sold as the delivery device; compatible needles must be purchased separately based on the specific animal requirements.

Check for air bubbles in the feed line and ensure the plunger is moving smoothly without resistance.

Verify the Sterimatic shroud is not obstructed by debris and that the spring mechanism is free moving.

Inspect the Luer-lock fitting to ensure it is tightened properly and check if the needle hub gasket is damaged.