Best current price£21.53from eBay
Shopping.co.uk recommended and popular offers
eBay£21.53Visit shop Primaflow Lead-X 1/2"" 7Lb x 25Mm Poly - LL12725P
Visit shop
B&Q£23.14Visit shop B&Q - Brass Lead-X 0.5" 7Lb X 25mm Poly
Visit shop2 offers from £21.53 - £23.14
View price history by clicking the chart icon.
The Primaflow Lead-X Coupler is designed for professional plumbers and homeowners tackling legacy plumbing infrastructure, specifically those needing to bridge the gap between traditional lead piping and modern MDPE systems. Its primary benefit is providing a robust, leak-free transition that ensures structural integrity in aging water supply lines; however, users should note that it is strictly sized for 1/2-inch lead pipes and 25mm MDPE, meaning it is not suitable for irregular pipe dimensions or high-pressure industrial applications.
| Model Part Number | LL12725P |
|---|---|
| Brand | Primaflow |
No, this coupler is strictly designed for 1/2 inch lead pipe diameters.
No, it is designed specifically to interface lead pipes with 25mm MDPE piping.
Standard plumbing wrenches are sufficient to secure the coupling nuts.
Yes, provided it is installed according to local building codes for underground water service lines.
Yes, the connection relies on an even seal, so ensure the lead pipe is not crushed or misshapen before installation.
Check that the lead pipe was deburred properly and ensure the nut is tightened securely against the seal.
Check that the lead pipe end is circular and free of debris or heavy oxidation; apply a small amount of plumbing lubricant if necessary.
Before installation, ensure the lead pipe is cut cleanly and free from significant deformations, as the coupler requires a consistent surface to maintain its seal. Always deburr the edges of the pipe to prevent damage to the internal O-rings of the coupling. When tightening, ensure you follow standard plumbing torque practices—avoid over-tightening which can stress the plastic components. For long-term care, periodically inspect the joint area for any signs of moisture or weeping after the initial installation. Ensure the pipe is properly supported on either side of the coupler to prevent mechanical strain on the connection point.
