Best current price£29.99from eBay
Shopping.co.uk recommended and popular offers
eBay£29.99Visit shop 3x Bartoline Ready Mixed Lightweight Filler No Shrinkage Cracking Quick-Dry 1L
Visit shop
B&Q£36.99Visit shop B&Q - 3X Ready Mixed Lightweight Filler No Shrinkage Cracking Quick-Dry 1L
Visit shop3 offers from £29.99 - £38.99
View price history by clicking the chart icon.
The Bartoline Ready Mixed Lightweight Filler is designed for DIY enthusiasts and professionals seeking a high-tech solution for surface repairs, offering a brilliant white, shrink-resistant finish that eliminates the need for extensive sanding. It is ideal for filling cracks and gaps in interior and exterior surfaces, though it is important to note that it is not compatible with metal or plastic surfaces.
| Colour | White |
|---|---|
| Model Part Number | LF1000 |
| Brand | Bartoline |
No, this product is not designed for adhesion to metal or plastic surfaces.
The product is formulated to dry to a smooth finish that typically requires no sanding.
You can generally overpaint the filler in approximately 30 minutes.
Yes, but you must seal it with an oil-based paint and protect it from rain until it has fully set.
The product should only be used in ambient temperatures of 5°C or higher.
No, it is specifically designed with glass bead technology to prevent shrinkage.
Ensure the depth of the hole does not exceed the recommended capacity for a single pass and apply in thinner layers if necessary.
Check the ambient temperature; if it is below 5°C or humidity is very high, the drying time will increase significantly.
Ensure an oil-based paint was used to seal the filler; water-based paints may not provide adequate protection against weathering.
Before application, ensure all surfaces are clean, dry, and entirely free from dust or loose debris. Use the product only when the ambient temperature is above 5°C to ensure proper curing. When using the filler outdoors, it is essential to shield the repair from rain until it has fully set. For long-term maintenance, store the container in a cool, dry place and ensure it is protected from frost at all times. Do not attempt to use this product on metal or plastic surfaces as it will not adhere correctly.
