D2P Rear Right Driver Side Central Door Lock Mechanism Replacement - 4G0839016
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This D2P Rear Right Driver Side Central Door Lock Mechanism is for owners of compatible Audi A6 C7 and A7 Sportback models experiencing issues with their rear right door lock. Its key benefit is restoring reliable central locking functionality to the rear right passenger door. A caveat is that professional installation by a qualified mechanic is recommended, and a 12-month warranty requires proof of professional fitting. This mechanism features a 9-pin D-shaped connector and electric operation, designed as a direct replacement for part number 4G0839016.
All features
| Model Part Number | 4G0839016 |
|---|---|
| Brand | D2P |
Extended Product Information
FAQs
What vehicles is this lock mechanism compatible with?
This part is compatible with Audi A6 C7 models (saloon and avant) from 2010-2018 and Audi A7 Sportback models from 2011-2018.
Does this part include the full door lock assembly?
This is a replacement central door lock mechanism, often referred to as an actuator, designed to replace the specific internal component responsible for electronic locking and unlocking. It is not the external door handle or the complete latch assembly unless specified.
What does 'electric operating mode' mean?
It means the lock mechanism is powered and controlled electronically by the vehicle's central locking system, rather than being a purely mechanical linkage.
What is the connector type?
It features a 9-pin D-shaped connector for electrical connection.
Is this a genuine Audi part?
This is an aftermarket part manufactured by D2P Autoparts, designed as a replacement for the original part number (MPN: 4G0839016).
What is required to get the 12-month warranty?
The 12-month warranty is valid when the part is fitted by a fully qualified mechanic. Proof of this professional installation, such as a letter on business letterhead, will be required.
Can I install this myself?
While technically possible for individuals with significant automotive repair experience, professional installation by a qualified mechanic is strongly recommended due to the complexity of door panel removal and electrical connections.
Troubleshooting
Door lock does not respond at all after installation.
Verify the 9-pin connector is securely seated and correctly aligned. Check vehicle fuses related to door locks. Ensure the new mechanism is the correct part for the vehicle model and year. Professional diagnosis of vehicle wiring may be required.
Lock works intermittently.
This could indicate an issue with the vehicle's wiring, control module, or potentially a fault with the new actuator. Confirm a solid connection. If the problem persists, consult a qualified mechanic to diagnose the vehicle's electrical system.
Lock makes unusual noises but does not operate.
This might suggest an internal issue with the mechanism or a binding issue within the door latch assembly. Ensure the mechanism is not obstructed by other door components. If the issue persists, the part may need to be replaced under warranty (if applicable) or professionally inspected.
Pros and Cons
Pros
- Restores faulty door lock functionality.
- Designed for specific Audi models for a precise fit.
- Electric operation for convenience.
- Comes with a 12-month warranty under specific conditions.
Cons
- Professional installation is recommended, potentially increasing overall cost.
- Warranty requires specific proof of professional fitting.
- Only compatible with specific Audi A6 C7 and A7 Sportback model years.
- No mention of materials or specific durability features beyond being a replacement part.
Setup, Compatibility & Care
Compatibility:
This D2P Rear Right Driver Side Central Door Lock Mechanism is compatible with:
- Audi A6 C7 (4G2, 4GC) models manufactured between 2010 and 2018.
- Audi A6 C7 Avant (4G5, 4GD) models manufactured between 2011 and 2018.
- Audi A7 Sportback (4GA, 4GF) models manufactured between 2011 and 2018.
Setup & Installation:
Installation involves removing the interior door panel to access the existing lock mechanism. The old unit is detached, and the new D2P mechanism, with its 9-pin D-shaped connector, is installed. Due to the complexity and the need to connect to the vehicle's electrical system, installation by a qualified professional is strongly recommended. Incorrect installation can lead to damage to the new part or the vehicle's electrical system.
Care:
As an internal door mechanism, this part requires no regular user care. Its function relies on proper installation and the vehicle's electrical system. Ensure the vehicle's door seals are in good condition to prevent moisture ingress, which could affect any electrical component over time.