Best current price£36.84from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£36.84Visit shop Nvent Eriflex Threaded Copper Busbar Tcb 12X4mm M5 - 550200
Visit shop1 offer from £36.84
View price history by clicking the chart icon.
The nVent ERIFLEX Threaded Copper Busbar (TCB12X4-1M) is designed for electrical engineers and industrial installers who require a reliable, high-conductivity solution for heavy-duty power distribution. Featuring a precise M5 thread pattern along its 990mm length, this busbar facilitates secure and efficient connections in complex electrical panels. While it offers superior structural and conductive integrity, users should note that the busbar is rigid and requires accurate measurement and mechanical mounting to ensure proper alignment during installation.
| Colour | Copper |
|---|---|
| Model Part Number | TCB12X4-1M |
| Brand | NVent ERIFLEX |
While copper is ductile, extreme caution is needed. Bending the busbar may compromise the integrity of the M5 threads; it is recommended to use straight runs whenever possible.
The TCB12X4-1M is manufactured from high-quality electrolytic copper, chosen for its superior electrical conductivity.
No, the busbar is supplied as the conductor component only. You will need to source separate ERIFLEX-compatible standoff insulators for mounting.
The TCB series typically uses high-purity copper. If installed in a corrosive environment, consider using a conductive anti-corrosion grease.
It is designed for use in controlled, indoor electrical enclosures. Outdoor use would require an additional IP-rated protective housing.
Verify that your fasteners are strictly M5 metric thread; ensure there is no debris or metal burr inside the pre-threaded hole.
Check the torque of the fasteners; ensure the terminal lug is making full, flat contact with the busbar surface.
Installation requires standard mechanical fastening equipment. Ensure that the busbar is mounted on appropriate insulated supports to prevent short circuits. When cutting the busbar to a custom length, use a fine-toothed hacksaw or a precision metal cutting tool, and deburr the cut edges thoroughly to prevent sharp points. To maintain peak conductivity, protect the copper from oxidation by using an approved electrical joint compound if the environment is humid or chemically active. Periodic inspections should focus on ensuring that hardware remains tight and that no signs of thermal discoloration are present at the connection points.
