D-C-Fix Self Adhesive Window Film - Splinter - 67.5cm - F200-8161

Name: D-C-Fix Self Adhesive Window Film - Splinter - 67.5cm - F200-8161
Brand: D-C-Fix
SKU: o6xi636zde
Availability: InStock

Refresh your home surfaces with this practical self-adhesive film, designed for easy application o...

Best current price£6.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£6.99Visit shop

B&Q - Self Adhesive Window Film Splinter 67.5Cm F200-8161

Visit shop

All Offers

2 offers from £6.99 - £10.66

View price history by clicking the chart icon.

B&QB&Q - Self Adhesive Window Film Splinter 67.5Cm F200-8161

Free delivery in 1–3 days

£6.99

Visit shop

eBay67.5cm Wide FROSTED ICE PRIVACY SPLINTED STICKY BACK PLASTIC SELF ADHESIVE VINYL

Free delivery in 1–3 days

£10.66

Visit shop

Product Information

Full details

The D-C-Fix Self Adhesive Window Film in the Splinter pattern is designed for DIY enthusiasts and renters looking to refresh interior surfaces without permanent structural changes. It offers a straightforward, budget-friendly way to update shelves, doors, and glass with a modern aesthetic, though it requires a steady hand and a smooth, clean surface to ensure a bubble-free finish.

All features

Model Part Number	F200-8161
Brand	D-C-Fix

Extended Product Information

FAQs

Can I use this on bathroom tiles?

It is designed for dry, flat surfaces. It is not recommended for areas that come into direct, frequent contact with water.

Does this film leave a residue?

If removed carefully, it should not leave a significant residue. Any leftover adhesive can typically be cleaned off with a mild adhesive remover.

Is this film heat resistant?

No, it should not be applied to surfaces that get hot, such as radiators or stove-side surfaces.

How do I cut the film straight?

Use the grid lines provided on the backing paper to measure and cut using a sharp pair of scissors or a craft knife against a straight edge.

Can I re-apply the film if I place it incorrectly?

It is best to get the placement right the first time. Excessive peeling and re-applying can weaken the adhesive and cause the film to stretch.

Troubleshooting

Air bubbles trapped under the film

Use a pin to prick the bubble gently and then push the air out towards the hole with a soft cloth.

Film edges are peeling

Ensure the surface was thoroughly degreased before application. You may use a hair dryer on a low setting to gently warm the adhesive to help it bond more effectively.

Pros and Cons

Pros

Easy to install for beginners
Completely removable without damaging surfaces
Adds instant visual interest to plain decor
Wide enough for most standard shelves and doors

Cons

Requires a perfectly clean surface for proper adhesion
Difficult to reposition once fully applied
Not suitable for outdoor use or high-moisture areas

Setup, Compatibility & Care

Surface Prep: Ensure the area is dry, flat, and dust-free. Clean with a non-abrasive household cleaner and dry completely.
Measurement: Measure your surface and add an extra 2cm to all sides for overlap.
Application: Peel back a small section of the backing and press firmly onto the surface, smoothing as you go.
Trimming: Use a sharp craft knife to trim away excess material around the edges.
Care: Clean the surface of the film with a soft, damp cloth. Avoid harsh chemicals or abrasive sponges, as these can scratch or degrade the pattern.