Bonda Wood Fill Two Part Filler - White - 500G

The working time is typically short due to its rapid-hardening nature. Refer to the product packaging for precise details, but expect to work relatively quickly once mixed.

While it provides a durable repair, always check the product specifications for suitability and specific application guidelines for exterior use, as moisture and UV exposure can affect performance over time.

Hardening time varies with temperature and humidity, but it is designed to harden rapidly, often within minutes to an hour, making it suitable for quick projects.

Yes, Bonda Wood Fill sands well and provides an excellent base for most paints, varnishes, and stains once fully cured.

Unopened, properly stored components typically have a good shelf life. Once opened, ensure they are sealed tightly. Refer to the packaging for specific expiry dates or storage recommendations.

The filler itself is white. It is intended to be painted or finished to match the surrounding wood or desired aesthetic.

Ensure the correct ratio of filler to hardener was used. Re-mix and apply, paying close attention to the measurements. Check that the hardener has not expired.

The defect may have been too deep for a single application. Apply in thin layers, allowing each to cure partially before adding the next. Ensure the wood surface is not excessively porous.

The filler may have been over-hardened or sanded too soon. Allow sufficient curing time. If it's excessively hard, use a coarser grit sandpaper initially, then transition to finer grits.

Ensure the wood surface was clean, dry, and free from dust, grease, or loose fibers before application. A slight roughening of the surface with sandpaper can improve adhesion.