Best current price£48.44from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£48.44Visit shop Millers Oils EE Performance C5 ECO 5W20 Fully Synthetic Engine Oil - 5 Litre
Visit shop6 offers from £48.44 - £92.37
View price history by clicking the chart icon.
This Millers Oils EE Performance C5 ECO 5W-20 is a fully synthetic engine oil designed for modern vehicles requiring a C5 5W20 specification. It offers enhanced engine efficiency and protection through its NANODRIVE low friction technology, reducing wear and improving fuel economy. A potential consideration is that it's specifically formulated for C5 applications, so vehicle compatibility must be confirmed.
| Model Part Number | 8612GGB |
|---|---|
| Brand | Millers Oils |
This oil is suitable for vehicles that specifically require a 5W-20 viscosity grade engine oil with an ACEA C5, API SN RC/SN, or ILSAC GF-5/GF-4 specification. Always confirm compatibility with your vehicle's owner's manual, paying close attention to specifications like Ford WSS-M2C948-B or JLR STJLR.03.5004.
NANODRIVE is a proprietary technology developed by Millers Oils that minimizes friction between moving engine parts at a microscopic level. This results in improved engine efficiency, reduced wear, and enhanced power output.
Mid SAPS (Sulphated Ash, Phosphorus, and Sulphur) technology protects modern exhaust after-treatment systems, such as Diesel Particulate Filters (DPF) and Gasoline Particulate Filters (GPF), by producing less ash. This helps prevent filter blockage and maintains emissions compliance.
No, you should only use the specific C-specification recommended in your vehicle's owner's manual. Using an incorrect C-specification can damage your exhaust after-treatment system. This oil is specifically for C5 applications.
The '5W' refers to the oil's viscosity at cold temperatures, while '20' refers to its viscosity at operating temperatures. A 5W20 oil is thinner at operating temperature than a 5W30, which reduces internal drag and can improve fuel economy, but it is essential to use the viscosity recommended by your vehicle manufacturer.
You should follow the oil change intervals recommended by your vehicle manufacturer. These intervals are typically found in your owner's manual and may vary depending on driving conditions.
Full technical specifications, including all approvals and recommendations, can usually be found on the Millers Oils official website or on the product's Technical Data Sheet (TDS).
Ensure the oil specification is correct (ACEA C5). If the correct oil is used and the issue persists, it may indicate a separate emissions system problem requiring professional diagnosis.
Verify that the correct 5W20 viscosity and C5 specification were used. If an incorrect grade or type of oil was accidentally used, it may need to be drained and replaced with the correct Millers Oils product. Ensure no other maintenance issues are present.
This can be normal for synthetic oils with cleaning agents, especially if the engine had older, less effective oil previously. The NANODRIVE technology and synthetic base help to clean the engine. Monitor the oil level and change oil at recommended intervals.
Compatibility:
This oil is specifically designed for vehicles that require an ACEA C5, API SN RC/SN, or ILSAC GF-5/GF-4 specification, and explicitly meets standards such as Ford WSS-M2C948-B, Jaguar Land Rover STJLR.03.5004, and others listed in the product data. Always consult your vehicle's owner's manual to confirm if this specific C5 5W20 oil is the correct grade and specification for your engine. Using the wrong oil can lead to engine damage and void warranties.
Setup:
Replacing engine oil is a standard maintenance procedure. Ensure your vehicle is parked on a level surface and the engine is at operating temperature (but not hot enough to cause burns). Drain the old oil completely, replace the oil filter, and refill with the correct quantity of new Millers Oils EE Performance C5 ECO 5W-20, as specified in your owner's manual. Dispose of used oil responsibly.
Care:
To maintain the benefits of this high-performance oil, adhere to the manufacturer's recommended oil change intervals. Regularly check your oil level and top up if necessary with the same specification oil. Store the oil container in a cool, dry place away from direct sunlight.
