Sony XLR-A4 Digital XLR Audio Adapter - 4 Channel

32-bit float recording captures audio with an extremely wide dynamic range. This means you can record very quiet sounds and very loud sounds simultaneously without digital clipping (distortion) or losing detail in the quiet parts. It provides significant flexibility in post-production, allowing you to adjust audio levels extensively without degradation.

No, the adapter receives power directly from the camera through the Multi Interface Shoe connection when used with compatible Sony cameras. This eliminates the need for separate batteries for the adapter itself.

Yes, the adapter supports standard XLR microphones, including those requiring phantom power (+48V), which can be enabled via the adapter's settings.

The adapter features four XLR inputs, allowing you to connect and record up to four microphones or audio sources at the same time.

The adapter is designed for Sony Alpha cameras equipped with a compatible Multi Interface (MI) Shoe that supports digital audio transmission. It is not universally compatible with all Sony cameras; please check your specific camera model's specifications.

Yes, the adapter can function as a USB audio interface when connected to a computer, making it suitable for high-quality audio input for live streaming or podcasting.

96kHz audio sampling rate allows for higher fidelity sound capture, resulting in clearer, more detailed audio with a wider frequency response compared to lower sampling rates like 48kHz. This complements high-resolution video capture.

Verify the XLR cables are securely connected to both the microphones and the adapter. Ensure the adapter is properly attached to the camera's MI Shoe. Check that the camera's audio input settings are configured for the digital adapter and that microphone levels are appropriately set in the camera or adapter settings.

While 32-bit float recording minimizes clipping, ensure input levels are not excessively high at the source. Adjust microphone gain if possible, or ensure the source audio is within a reasonable range. The adapter's design inherently handles peaks well, but extreme input levels can still cause issues.

Confirm the camera has a compatible MI Shoe and that the camera firmware is up to date. Try reseating the adapter on the MI Shoe. If using the extension cable, test without it to rule out cable issues.

Ensure all connections are firm. Use balanced XLR cables. If phantom power is needed for condenser microphones, ensure it is enabled on the adapter. Test in a different environment to rule out electromagnetic interference.

Connect the adapter to your computer using a compatible USB cable. Ensure the adapter is selected as the audio input device in your computer's sound settings and within your recording software. Check for any necessary driver installations (though it should be class-compliant).