Best current price£20.94from B&Q
Shopping.co.uk recommended and popular offers
B&Q£20.94Visit shop B&Q - 3/16" X 32 Bsf Thread Repair Cutter Kit Helicoil Set For Damaged Threads 14Pc
Visit shop2 offers from £20.94
View price history by clicking the chart icon.
This AB Tools thread repair kit is designed for professionals and DIY enthusiasts needing to fix damaged 3/16" x 32 BSF internal threads. It offers a robust, permanent solution for stripped or corroded threads, creating a stronger internal thread, especially in softer materials. A potential consideration is the specific nature of the British Standard Fine thread, requiring accurate application.
| Model Part Number | ABT008 |
|---|---|
| Brand | AB Tools |
This kit is specifically designed to repair 3/16" x 32 BSF (British Standard Fine) internal threads.
No, the kit includes stainless steel helicoils, which are highly resistant to rust and corrosion.
No, this kit is exclusively for 3/16" x 32 BSF threads and is not compatible with metric or other imperial thread sizes.
The kit is effective on a variety of materials, including metals, plastics, and composites, creating a stronger internal thread, particularly in softer materials.
The stainless steel inserts have precise tolerances and create a new thread that is typically stronger and more durable than the original, especially when replacing threads in softer parent materials.
The tang breaking tool is used to snap off the small section (tang) of the installed insert that protrudes slightly after installation, leaving a smooth internal thread.
The kit comes with 10 x 3/16" x 32 BSF inserts, which should be sufficient for multiple repairs. Additional inserts would need to be purchased separately if more are required.
Ensure the drill bit is sharp, running at the correct speed for the material, and using appropriate cutting fluid if necessary.
Apply steady, even pressure. Use a tapping fluid. Turn the tap only a quarter to a half turn before backing it out to clear chips. Ensure the hole is drilled to the correct depth.
Verify the correct tap has been used for the insert size and that the tapped hole is clean. Ensure the insert is properly seated on the installation tool.
Ensure the insert was fully seated and the tang was properly broken off. Re-evaluate the drilling and tapping process for accuracy.
Setup:
Compatibility: This kit is specifically designed for 3/16" x 32 BSF (British Standard Fine) internal threads. It is not compatible with other thread sizes or types (e.g., UNC, UNF, Metric).
Care:
