Connect Exhaust Clamps - 54mm - 10 Piece Set

These clamps are designed for exhaust pipes with an external diameter of 54mm, which is approximately 2 1/8 inches.

For optimal performance and a secure seal, it is recommended to use these clamps only on exhaust pipes that are precisely 54mm in diameter. Using them on pipes of significantly different sizes may result in leaks or improper fitting.

The clamps are constructed from durable metal designed to withstand the high temperatures and corrosive environment of an exhaust system.

This is a 10-piece set, providing ten individual exhaust clamps.

Yes, these clamps are designed to be reusable provided they are removed carefully and show no signs of damage or excessive corrosion.

Typically, you will need a wrench or socket set that fits the bolt head on the clamp, usually a standard metric or imperial size.

Ensure the clamp is the correct size for the pipe. Check that the bolt threads are clean and not damaged. Verify that the clamp is properly seated around the pipe.

Confirm the pipe diameter matches the clamp size exactly. Ensure the clamp is tightened to an appropriate torque, compressing the pipe slightly. Check for any cracks or damage on the exhaust pipe itself.

This is a common occurrence with metal components exposed to exhaust heat and moisture. While cosmetic, extensive corrosion could weaken the clamp. Replace if significant rust compromises structural integrity. Clean with a wire brush and apply a high-temperature exhaust sealant if desired for protection.