Best current price£72.98from B&Q
Shopping.co.uk recommended and popular offers
B&Q£72.98Visit shop B&Q - 5 Tonne Telescopic High Lift Bottle JackRange 225mm500mm275mm Stroke
Visit shop1 offer from £72.98
View price history by clicking the chart icon.
The SGS 5 Tonne Telescopic High Lift Bottle Jack is designed for mechanics and DIY enthusiasts requiring robust lifting capabilities for vehicles and heavy machinery. Its primary benefit is the extended reach and high lifting capacity, reducing the need for multiple lifts or cribbing. A key consideration is its weight, making portability a factor for some users.
| Brand | SGS |
|---|
The maximum lifting height is 500mm.
The minimum lifting height is 222mm.
This jack has a maximum lifting capacity of 5 tonnes (5000 kg).
ENP stands for Electroless Nickel Plating. This coating prevents rust and ensures a smooth, durable surface for the piston.
Ensure the jack is used on a level surface and not overloaded. Periodically inspect the double seals in the pump and the ram seals for wear and tear. Proper maintenance and storage also help prevent leaks.
The jack has an extra-long stroke of 275mm.
Yes, the jack features an automatic safety overload valve that prevents damage if the load exceeds its capacity.
Please refer to the manufacturer's documentation or the retailer for specific warranty information, as it is not provided in the product details.
Ensure the release valve is fully closed. Check the hydraulic oil level and top up if necessary. Verify the load does not exceed the 5-tonne capacity.
Inspect the pump seals and ram seals for damage or wear. Tighten any loose fittings. If leakage persists, the seals may need replacement.
Check for any obstructions. Ensure the release valve is fully open when lowering. The hydraulic fluid may need to be replaced if the jack has been stored for a long time or shows signs of contamination.
This could indicate air in the hydraulic system. Slightly open the release valve to bleed out any air, then re-close and test. Ensure the jack is on a stable surface.
Setup: Ensure the jack is placed on a firm, level surface. Position the jack directly under the designated lift point of the vehicle or equipment. For operation, locate the release valve (typically a screw on the base) and close it by turning clockwise. Operate the pump handle up and down to raise the load. To lower, slowly open the release valve counter-clockwise.
Compatibility: This jack is suitable for lifting vehicles and machinery within its 5-tonne (5000 kg) capacity. Always consult your vehicle's manual for the correct jacking points.
Care: After each use, wipe the jack clean with a dry cloth. Store in a dry environment. Periodically check the oil level and inspect seals for any signs of wear or leakage. Ensure the release valve operates smoothly. Avoid exceeding the maximum weight capacity.
