Toupret Anti-Damp Render is an effective solution for controlling damp on both interior and exteri...Toupret Anti-Damp Render is an effective solution for controlling damp on both interior and exterior surfaces, allowing substrates to breathe due to its water-vapour permeability. On exteriors, it acts as a barrier against water penetration. For interiors, it functions as a water barrier while permitting the substrate to breathe, making it ideal for applications in garages, cellars, or basements. This render can be applied using a brush or trowel to damp and raw masonry substrates such as cement, concrete, breeze blocks, bricks, and stone. Prior to application, the substrates must be stripped down to the masonry. It offers a breathable barrier suitable for damp, porous, and untreated masonry surfaces, eliminating the need to seal the substrate. The render is ready to be painted over in 12-24 hours. It can be applied to damp and raw masonry substrates, with a typical recommended application thickness of 1.5mm. The working time is 3-4 hours, and the drying time is 24-48 hours depending on conditions. The final colour when dry is white. Coverage is approximately 1.5 m² per bag at 10 mm thickness.
This guide is for anyone looking to combat damp issues in their home, offering a breathable solution for interior and exterior masonry. The Toupret Anti-Damp Render provides a barrier against water penetration while allowing the substrate to breathe. However, proper surface preparation is crucial for optimal results. It's ideal for use on cement, concrete, bricks, and stone, providing a white finish that can be painted over in as little as 12 hours.
All features
Colour
White
Model Part Number
TTHUMIB06GB
Brand
Toupret
Extended Product Information
FAQs
What surfaces can I apply Toupret Anti-Damp Render to?
It can be applied to damp and raw masonry substrates such as cement, concrete, breeze blocks, bricks, and stone.
How long does it take for the render to dry?
Drying time is typically 24-48 hours, depending on environmental conditions.
Can I paint over the render?
Yes, it can be painted over in 12-24 hours after application.
What is the working time for this render?
The working time is 3-4 hours.
How should I apply the render?
Apply using a brush or trowel.
What is the recommended thickness for application?
The recommended application thickness is 1.5mm.
What is the coverage per bag?
Coverage is approximately 1.5 m² per bag at 10 mm thickness.
Troubleshooting
Render is not drying properly.
Ensure adequate ventilation and check the ambient temperature and humidity. Allow for a full 48 hours to dry in damp conditions.
Render is cracking.
Ensure the surface was properly prepared and free of loose materials before application. Avoid applying too thick a layer.
Render is peeling or flaking.
Ensure the surface was properly prepared. Ensure the surface is clean, dry and free of any contaminants before application.
Pros and Cons
Pros
Provides a breathable barrier against damp.
Suitable for both interior and exterior use.
Easy to apply with a brush or trowel.
Ready for painting in a short timeframe.
Eliminates the need for substrate sealing.
Cons
Requires stripping down to the masonry before application.
Drying time of 24-48 hours depending on conditions.
Coverage is approximately 1.5 m² per bag at 10 mm thickness.
Working time is limited to 3-4 hours.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is stripped down to the raw masonry before application. Remove any existing paint, plaster, or loose materials.
Application: Use a brush or trowel to apply the render evenly. The recommended thickness is 1.5mm.
Working Time: You have approximately 3-4 hours to work with the render after mixing.
Drying Time: Allow 24-48 hours for drying, depending on environmental conditions.
Painting: Once dry, the render can be painted. Wait at least 12-24 hours before applying paint.
Compatibility: Compatible with cement, concrete, breeze blocks, bricks, and stone.
Care: Store in a dry place. Clean tools immediately after use with water.