Best current price£35.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£35.99Visit shop B&Q - Flame Fighter Tape50mm X 76M Fire Rated Drywall Joint Tape
Visit shop
The Range£38.66Visit shop Walther Strong Flame Fighter Tape 50Mm X 76M - White
Visit shop2 offers from £35.99 - £38.66
View price history by clicking the chart icon.
The Walther Strong Flame Fighter Tape is designed for contractors and builders needing a faster, cleaner, and code-compliant method for fire-rated drywall finishing. Its key benefit is providing a self-adhesive, plaster-free alternative to traditional tapes, significantly reducing dust and application time. A potential caveat is the need for proper surface preparation to ensure optimal adhesion. This innovative tape offers a durable, dust-free finish suitable for a wide range of applications, including critical areas like hospitals and educational buildings, as well as residential and commercial projects.
| Model Part Number | WS-T/FLAMEFIGHTER |
|---|---|
| Brand | Walther Strong |
Flame Fighter Tape is a self-adhesive, plaster-free alternative that eliminates the need for pre-wetting and significantly reduces dust during application, offering a faster and cleaner finishing process.
It is specifically designed for fire-rated drywall finishing in projects requiring compliance with fire safety standards. While versatile, its primary advantage lies in these specific applications.
The tape complies with major fire safety standards including ASTM E119, CAN/ULC S101, ASTM C474 and C475, NFPA 251, UL 263, and UBC 7-1-1994, confirming performance in one-hour and two-hour fire-rated assemblies.
The product information focuses on interior fire-rated drywall finishing. It is not specified for exterior use.
Store the tape in a cool, dry environment, protected from direct sunlight and extreme temperatures, and keep it sealed to maintain adhesive quality.
The tape is self-adhesive and does not typically require a primer for adhesion. However, the drywall surface must be clean and dry. Primer might be considered if surface conditions are challenging.
The tape is designed to maintain the integrity of the fire-rated assembly for its intended lifespan, provided it is installed correctly and not compromised by damage or improper finishing.
Ensure the drywall surface is thoroughly cleaned, dry, and free from any contaminants like dust, oil, or moisture before application. Re-apply with firm pressure.
When applying, start from the center and press outwards firmly. If bubbles are present, try to smooth them out during application. Small imperfections might be covered by joint compound, but significant bubbles may require re-application.
Proper application of joint compound is crucial. Follow standard drywall finishing techniques, allowing adequate drying time between coats. Ensure the tape is fully embedded.
This often indicates insufficient pressure during application or a contaminated surface. Ensure edges are pressed down firmly. If issues persist, consider a primer or specific adhesion promoter on the substrate.
Setup:
Compatibility:
Care:
