Best current price£18.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.99Visit shop B&Q - Medium Oak Spirit Based Wood Dye 1 Ltr Quick Drying Professional Grade Wood Stain For Interior Furniture And Diy
Visit shop1 offer from £18.99
View price history by clicking the chart icon.
This professional-grade spirit-based wood dye is perfect for woodworkers, furniture restorers, and DIY enthusiasts looking to enhance interior woodwork with a rich, lasting medium oak finish. Its primary benefit is deep penetration and a rapid, streak-free application that brings out the natural grain of your timber without the long wait times of oil-based alternatives. A key caveat to consider is that the quick-drying nature of the formula requires a steady hand and efficient application technique to avoid lap marks on larger surface areas.
| Colour | Brown |
|---|---|
| Brand | TT's Timber Supplies & Creations |
No, this is specifically formulated for interior woodwork and may fade or break down if exposed to direct sunlight and outdoor weather conditions.
Yes, this dye provides color but not protection. You must apply a topcoat such as varnish, lacquer, or wax to protect the surface.
Since it is a spirit-based dye, use methylated spirits or the manufacturer-recommended solvent to clean your tools.
Yes, you can generally mix spirit-based dyes within the same brand to achieve custom shades, but always test the mixture on scrap wood first.
It should only be used in a well-ventilated area due to the solvent content. Keep away from children and pets during application and drying.
Ensure the wood is sanded evenly and any sanding dust is completely removed before application. Use a slightly damp cloth to lightly wipe the wood before dying to raise the grain.
Work in smaller sections or use a larger applicator to keep the leading edge of the dye wet. Apply quickly and buff immediately if you notice areas drying too fast.
Spirit-based dyes can often be thinned with a compatible spirit or solvent thinner; test on scrap wood first to determine the dilution ratio.
Before application, ensure the wood surface is sanded down to a smooth finish and is completely free of dust, grease, or previous finishes. We recommend a final sanding with 180-220 grit paper. Always test the dye on an inconspicuous area or a scrap piece of the same timber to confirm the desired color depth. While this dye is compatible with most clear topcoats like polyurethane, lacquer, or wax, it is always best to test your topcoat on a sample patch to ensure full compatibility. Store the bottles in a cool, dry place away from heat sources and open flames. If the product is supplied as 2 x 500ml bottles, ensure both are sealed tightly after use to prevent solvent evaporation.
