Haier Heat Pump Tumble Dryer - A++

Open the door and locate the filter. Remove the lint by hand or with a vacuum cleaner after each drying cycle.

The water tank is usually located at the top or bottom of the dryer. Remove the tank and empty the water into a sink. The 'Water Tank Full' indicator will light up when the tank is full.

The I-Refresh program uses steam to refresh and sanitize clothes, eliminating odors and bacteria without washing.

Select your desired drying program and press the 'Start Delay' button. Use the arrow buttons to set the desired delay time, then press 'Start'.

Remove clothes promptly after the drying cycle is complete. Consider using the 'Anti-Crease' function if available, which tumbles the clothes periodically after drying to prevent wrinkles.

Please consult the warranty documentation that came with your product or contact Haier customer service for specific warranty details.

It is not recommended to dry shoes in this dryer, as they can damage the appliance. Always check the care label on your garments for drying instructions.

Check if the dryer is properly plugged into the electrical outlet and that the power supply is working. Also, check that the door is completely closed.

Check if the lint filter is clean. Ensure that you have selected the appropriate drying program for the fabric type. Make sure the room temperature is adequate and the appliance is well ventilated. Also check if the water tank is full if applicable.

Refer to the user manual for the specific error code and troubleshooting steps.

Ensure your dryer is within range of your WiFi router. Restart your dryer and router. Check your network connection. Re-enter your WiFi password if necessary.