Best current price£18.00from Currys
Shopping.co.uk recommended and popular offers
Currys£18.00Visit shop Polymaker Panchroma 3D Printing Filament - Sapphire Blue
Visit shop4 offers from £18.00 - £69.99
View price history by clicking the chart icon.
Panchroma™ Matt PLA Filament is designed for 3D printing enthusiasts seeking ease of use and visually striking matte finishes. Its bioplastic base offers reliable performance, making it suitable for both beginners and experienced users. While it provides excellent adhesion and layer bonding, users should ensure their printer is calibrated for optimal matte surface results. This guide covers its features, practical applications, setup, and maintenance.
| Model Part Number | CA04038 |
|---|---|
| Brand | POLYMAKER |
The primary advantage is its ability to produce a smooth, non-reflective matte finish directly from the 3D printer, offering a professional aesthetic without extensive post-processing.
Yes, Panchroma™ Matt PLA is designed to be easy to use and provides consistent printing quality, making it suitable for both beginners and experienced users.
The recommended printing temperature is between 190°C and 230°C. The recommended bed temperature is between 25°C and 60°C. Fine-tuning within this range may be necessary for optimal results.
Store the filament in a cool, dry environment, ideally in a sealed bag with desiccant to prevent moisture absorption, which can degrade print quality.
Yes, it provides good layer adhesion for strong prints. However, like most PLA, it may become soft at elevated temperatures and can be brittle under significant stress compared to other engineering filaments.
While the matte finish is inherent, it's important to calibrate print settings correctly. Very rough handling or abrasive post-processing might affect the surface quality.
The spool dimensions are 200mm in diameter and 65.6mm in width, with a 55mm inner hole diameter. It is supplied on a cardboard spool.
Check if the nozzle temperature is within the recommended range (190°C - 230°C). Ensure the nozzle is not clogged. Verify the filament is properly loaded and feeding freely.
Increase printing temperature slightly. Ensure the print bed is clean and level for good first-layer adhesion. Reduce print speed if necessary.
Reduce retraction distance and/or increase retraction speed. Ensure filament is dry; consider using a filament dryer. Lower printing temperature slightly.
Ensure printing temperature is optimized; slightly lower temperatures can sometimes enhance the matte effect. Verify print speed is consistent. Ensure the nozzle is clean and not worn.
Setup: Panchroma™ Matt PLA is supplied on a 1kg cardboard spool with dimensions of 200mm diameter, 65.6mm width, and a 55mm inner hole diameter. Ensure your 3D printer's spool holder can accommodate this size. Load the filament as you would any other 1.75mm PLA. Calibrate your printer's extruder temperature between 190°C and 230°C and the heated bed temperature between 25°C and 60°C for optimal results.
Compatibility: This filament is compatible with most FDM (Fused Deposition Modeling) 3D printers. It is not recommended for resin 3D printers.
Care: Store Panchroma™ Matt PLA in a cool, dry place, preferably in an airtight bag with desiccant, to prevent moisture absorption. Moisture can lead to printing issues like stringing and poor layer adhesion. Regularly clean your printer's nozzle and bed to ensure consistent extrusion and adhesion.
