Thompson's Water Seal Clear Protective Waterproofing - 1L

It is suitable for exterior wood, brick, stone, and concrete surfaces.

No, Thompson's Water Seal Clear is designed to dry clear and preserve the natural appearance of the material.

Typically, two coats are recommended for best results, depending on the porosity and condition of the surface. Allow the first coat to absorb before applying the second.

Tools should be cleaned with white spirit immediately after use.

Apply when the surface is clean and dry, and when no rain is expected for at least 24-48 hours to allow for proper curing.

The duration of protection varies depending on environmental conditions and surface wear. Reapplication may be necessary over time.

No, for optimal performance and to prevent issues like cloudiness, the surface must be clean and completely dry before application.

Ensure the surface was thoroughly cleaned and dried before application. Reapply a second coat if the surface is highly porous or if the first coat was not fully absorbed.

This can occur if the product was applied too heavily or unevenly. In some cases, light sanding after curing might help, or a reapplication after the surface has fully dried may even out the appearance.

This is typically a sign of moisture trapped beneath the surface. Ensure the surface was completely dry before application and allow adequate drying time in good weather conditions. Avoid application if rain is expected.

Clean tools with white spirit immediately after use before the product dries. If dried, mineral spirits or a stiff brush may be required, but prompt cleaning is most effective.